Extender para Wi-Fi usando Ethernet
Extender para Wi-Fi usando Ethernet
You're looking to extend your Ethernet connection to a spot without Wi-Fi. A repeater or extender would work well here, plugging into your Ethernet cable to provide wireless coverage. I recommend checking options like TP-Link or Netgear devices for reliable performance in that setup.
You need a connection spot. Consider these options: https://www.amazon.com/Ubiquiti-Unifi-Ap...7a9c0027d0 An old router works too, or opt for a more affordable one if signal strength isn't critical.
Essentially, you disable the DHCP, assign a static IP address, and then finish by linking it directly via a cable to the computer. Wi-Fi might also work depending on the router, but once you connect the internet cable to its regular input port, you're done.
Consumer routers typically combine wireless access points with routing capabilities into a single device. A router alone directs data between the modem and multiple clients. Many industrial routers lack wireless features and operate solely on wired connections. You can repurpose older routers as access points by adjusting their settings accordingly.
Alright then, thanks everyone! I'll check back if I need more assistance.