Experiencing game crashes or blue screens on Windows 10 when XMP is activated
Experiencing game crashes or blue screens on Windows 10 when XMP is activated
Hello, based on what you shared in the title, it looks like enabling XMP might have been the main factor since that was the only change you made before the issue began. The CPU was set to run at 4.2Ghz to push RAM to 3000Hz as originally planned. You're currently disabling XMP and using the default 2133Hz, and everything appears to be functioning properly so far. Could you help clarify how this might have triggered the problem? Thank you for your understanding.
The XMP setting might not function in all configurations. You'll likely need to adjust RAM parameters manually to achieve stability at higher clock speeds. This could involve adjusting timing settings or increasing voltage. If you share your system specifications and CPU-Z screenshots, I can assist in identifying a suitable starting point.
The XMP setting might not function in all configurations. You'll likely need to adjust RAM parameters manually to achieve stability at higher clock speeds. This could involve adjusting timing settings or increasing voltage. If you share your system specifications and CPU-Z screenshots, I can assist in choosing a suitable starting point.
This is the correct product?
Check out this link: http://www.corsair.com/en-us/vengeance-l...m2b3000c15
The datasheet mentions testing at 3000MHz with 15-17-17-35 timings at 1.35V (see SPD section of CPU-Z).
You can begin with those manual settings, adjusting the rest automatically. Check stability and adjust voltage to 1.36V if needed. If that doesn't work, try loosening timings to 16-18-18-35.
These are exactly my RAMs; I recall the 15-17-17-35 at 1.35V caused issues. I'll start by increasing the voltage and then modify timings as suggested.
Looking forward to your feedback. Thanks!