F5F Stay Refreshed Power Users Networks Ethernet speed limited to 10mbps

Ethernet speed limited to 10mbps

Ethernet speed limited to 10mbps

H
Heroteddy
Member
203
12-06-2024, 06:22 PM
#1
H
Heroteddy
12-06-2024, 06:22 PM #1

C
CiscoMiner
Senior Member
500
12-06-2024, 07:32 PM
#2
10 megabits might not always be enough; Cat5 can sometimes face issues with Gigabit speeds, leading the port to revert to 100 meg for stability. Have you got a Cat5e or Cat6 cable to test?
C
CiscoMiner
12-06-2024, 07:32 PM #2

10 megabits might not always be enough; Cat5 can sometimes face issues with Gigabit speeds, leading the port to revert to 100 meg for stability. Have you got a Cat5e or Cat6 cable to test?

I
IIlIlIIllIlI
Member
61
12-07-2024, 11:11 PM
#3
I don't have a direct measurement, but I can help you optimize your connection or guide you on how to check your speed.
I
IIlIlIIllIlI
12-07-2024, 11:11 PM #3

I don't have a direct measurement, but I can help you optimize your connection or guide you on how to check your speed.

A
AlexRoosio
Member
204
12-08-2024, 12:55 AM
#4
120 mbps
A
AlexRoosio
12-08-2024, 12:55 AM #4

120 mbps

P
Peace_and_Hope
Member
130
12-09-2024, 08:56 PM
#5
With a 120Mbps connection, your download speeds will typically stay under about 10MBps, even with a fast Ethernet link.
P
Peace_and_Hope
12-09-2024, 08:56 PM #5

With a 120Mbps connection, your download speeds will typically stay under about 10MBps, even with a fast Ethernet link.

F
Flashice
Member
172
12-15-2024, 08:55 PM
#6
10 megabytes, with two cables—one connects to the wall using Cat5, and the other reaches your computer via Cat5e.
F
Flashice
12-15-2024, 08:55 PM #6

10 megabytes, with two cables—one connects to the wall using Cat5, and the other reaches your computer via Cat5e.

M
Mirko4332
Member
70
12-16-2024, 02:07 AM
#7
You're seeing a 100 meg connection through the wall. Do you have another device to test on that link? Make sure all eight cables are correctly attached at each end inside the wall. 10/100 Fast Ethernet uses just two pairs, while Gigabit Ethernet requires all four.
M
Mirko4332
12-16-2024, 02:07 AM #7

You're seeing a 100 meg connection through the wall. Do you have another device to test on that link? Make sure all eight cables are correctly attached at each end inside the wall. 10/100 Fast Ethernet uses just two pairs, while Gigabit Ethernet requires all four.