F5F Stay Refreshed Software Operating Systems Error encountered while installing or configuring WinXP.

Error encountered while installing or configuring WinXP.

Error encountered while installing or configuring WinXP.

T
Thepiggy2005
Member
161
10-05-2024, 02:35 AM
#1
Good evening! I’ve burned an ISO of Windows XP (SP3 64bit + SATA drivers) onto a CD, which worked because the installation was around 640MB. I own a genuine copy, but the original CD is now damaged and no longer functional. I need to install XP on a second SSD in my older laptop. For safety, I chose MBR for the desired XP location since GPT isn’t supported online, though I didn’t format the drive beforehand—usually you can do that during advanced setup. With legacy boot enabled, the system will boot from the CD, but I’m experiencing a blue screen three times during installation. I’m unsure how to resolve this. I’ll share all the details for troubleshooting. Also, none of my laptop’s drives are infected with malware. I recently cleaned everything and have Malwarebytes installed, so I don’t know why the setup thought otherwise. Thanks in advance! My laptop is an Acer i7 4702MQ with 16GB RAM, Nvidia GT750M, and a Samsung 840 EVO 250GB SATA drive (intended for XP). It also has a 1TB HDD.
T
Thepiggy2005
10-05-2024, 02:35 AM #1

Good evening! I’ve burned an ISO of Windows XP (SP3 64bit + SATA drivers) onto a CD, which worked because the installation was around 640MB. I own a genuine copy, but the original CD is now damaged and no longer functional. I need to install XP on a second SSD in my older laptop. For safety, I chose MBR for the desired XP location since GPT isn’t supported online, though I didn’t format the drive beforehand—usually you can do that during advanced setup. With legacy boot enabled, the system will boot from the CD, but I’m experiencing a blue screen three times during installation. I’m unsure how to resolve this. I’ll share all the details for troubleshooting. Also, none of my laptop’s drives are infected with malware. I recently cleaned everything and have Malwarebytes installed, so I don’t know why the setup thought otherwise. Thanks in advance! My laptop is an Acer i7 4702MQ with 16GB RAM, Nvidia GT750M, and a Samsung 840 EVO 250GB SATA drive (intended for XP). It also has a 1TB HDD.

C
Cupcake_Rose
Posting Freak
844
10-05-2024, 09:54 AM
#2
In the BIOS, change the SATA setting to IDE rather than AHCI.
C
Cupcake_Rose
10-05-2024, 09:54 AM #2

In the BIOS, change the SATA setting to IDE rather than AHCI.

P
peter4everpan
Member
235
10-06-2024, 12:27 AM
#3
That could be the issue. I’ll check why the IDE is needed during boot versus when using the CD/DVD drive.
P
peter4everpan
10-06-2024, 12:27 AM #3

That could be the issue. I’ll check why the IDE is needed during boot versus when using the CD/DVD drive.

R
ReZeeG
Junior Member
46
10-07-2024, 07:22 AM
#4
Based on the brief reading, compatibility issues might arise if your controller doesn’t match your setup. Changing SATA modes often causes other drives to crash in a blue screen. You may need to start Windows 10 with AHCI active and install old IDE drivers or reinstall them. This situation was similar with Windows 7; I’m not sure how Windows 10 will manage it—try booting into Windows 10 directly and observe the outcome.
R
ReZeeG
10-07-2024, 07:22 AM #4

Based on the brief reading, compatibility issues might arise if your controller doesn’t match your setup. Changing SATA modes often causes other drives to crash in a blue screen. You may need to start Windows 10 with AHCI active and install old IDE drivers or reinstall them. This situation was similar with Windows 7; I’m not sure how Windows 10 will manage it—try booting into Windows 10 directly and observe the outcome.

D
diablo502
Junior Member
12
10-07-2024, 08:04 AM
#5
It seems to function now with IDE, I'll keep you informed.
D
diablo502
10-07-2024, 08:04 AM #5

It seems to function now with IDE, I'll keep you informed.

Q
qFame
Member
197
10-07-2024, 02:45 PM
#6
Great to hear it's functioning properly and that XP remains active.
Q
qFame
10-07-2024, 02:45 PM #6

Great to hear it's functioning properly and that XP remains active.

C
Crackalack
Member
161
10-09-2024, 12:07 AM
#7
Remaining tasks still pending.
C
Crackalack
10-09-2024, 12:07 AM #7

Remaining tasks still pending.

I
Iz_Bella
Member
78
10-15-2024, 07:23 PM
#8
Hope everything turns out well
I
Iz_Bella
10-15-2024, 07:23 PM #8

Hope everything turns out well

M
MagicalMagic
Junior Member
13
10-19-2024, 02:34 AM
#9
Windows XP 64 bit tends to be the least stable OS I've faced. It's best to stick with the 32-bit version. Many drivers perform poorly or are incomplete, and memory handling often leads to crashes. Most third-party software refuses support for XP 64 bits, which can result in denial of service even if you try to run it. As a programmer, I've experienced frequent issues when problems arise on XP 64 bits, so many companies avoid offering support for their applications there.
M
MagicalMagic
10-19-2024, 02:34 AM #9

Windows XP 64 bit tends to be the least stable OS I've faced. It's best to stick with the 32-bit version. Many drivers perform poorly or are incomplete, and memory handling often leads to crashes. Most third-party software refuses support for XP 64 bits, which can result in denial of service even if you try to run it. As a programmer, I've experienced frequent issues when problems arise on XP 64 bits, so many companies avoid offering support for their applications there.