Error encountered on newly installed system "DPC_Watchdog_Violation"
Error encountered on newly installed system "DPC_Watchdog_Violation"
Hey there, I recently built a new PC last year and have been facing frequent BSOD issues. It usually happens daily, sometimes for just a couple of days before it returns—usually once a day. The worst was two incidents in an hour, but most often it’s just one per day. When it occurs, the system freezes, locks up for 2-3 minutes, and then restarts. I’ve tried many fixes already: updated the motherboard BIOS, ran MemTest86 for five hours without errors, installed GPU drivers without using any extra software, and even tried older driver versions. I disabled XMP and SAM settings.
I read that the RX6800 model has several stability issues, especially when playing games like "Lost Ark." After switching to a different GPU—my original GIGABYTE GTX 960 4GB—I experienced stability for about ten days without BSOD. I contacted my retailer, who told me to send back the old GPU and replace it with a new one. I was relieved when they replaced it with the same model, but after two days it started again. I’ve only managed to read basic minidump files due to limited knowledge in that area.
I’m still learning how to handle software problems, mostly relying on quick searches online. PC RIG OS: Windows 10 x64 CPU: Ryzen 5 5600 Mainboard: MSI MPG B550 Gaming Plus BIOS Version: AMI BIOS 7C56v1B RAM: G.Skill RipJaws V Black 32GB DDR4 3600mhz CL18 dual kit GPU: XFX Radeon RX 6800 QICKSILVER PSU: Be Quiet Pure Power 11CM 600w CPU Cooler: Be Quiet Dark Rock Pro 4 CPU Case: Be Quiet Pure Base 500DX 011223-5843-01.zip
appears to be a driver problem. several discussions on the web mention this, especially for the 7000 series and similar models. many users disable freesync and set it to 144hz. https://forums.guru3d.com/threads/for-rx...es.446079/
I wasn't able to confirm the outcome based on that discussion. If you review the thread, they suggest turning off the feature in software, adjusting the frequency to 60hz, ensuring stability, then reverting to 144hz. Once freesync is enabled, system problems appear at 144hz. Some users reported issues only after a complete Windows reinstall, while others said waiting helped. Someone with similar experience might share their thoughts.
Would by good if you could check all your memory dumps on your system and check the module/image that is causing the problem, if it is always the same driver or application. There is a post on How to Analyze Memory Dump Files (.dmp) in Windows 10 (helpdeskgeek.com) how to analyse a dump file that is created while a BSOD. Proceed with section "How to Analyze Windows Memory Dump Files Using WinDbg" and open the dump. Memory dump files can be in the folder c:\windows\minidump or it can be c:\windows\memory.dmp. It depends on your "Startup and Recovery" settings. You may also want to try a older driver. DDU the current driver and take one from the archive AMD Radeon™ RX 6800 Previous Drivers | AMD Disable automatic driver installation by windows How to Disable Automatic Driver Updates Windows 10 (3 Ways) (minitool.com) and install the driver from archive. Try disable virtual memory (page file) for test and look if the behaviour changes (enable after test!) or try to set it to a fixed size. 32 GB Ram => 32 GB * 1.5 * 3 = 144 GB (147456 MB). Had a system that crashed and always reported different reasons on the BSOD (Memory, Interrupt, DPC, ...). Moving the page file to a second drive (not OS drive) solved the problem.
I've already tested an older driver version, but it didn't help either. So I swapped my current GPU for the GTX 960, and the issue disappeared for a week. After replacing it with another identical card, the problem reappeared. I also checked the mini dump files (including today's) to see what to look for, but I'm not sure what to search for.
Yes, you can utilize a file-sharing platform such as TransferXL for uploading the files. Files linked in a forum post cannot be downloaded directly.
This link appears to point to a file upload location. It seems to be a placeholder or example URL.
The issue stems from the AMD driver amdkmdag.sys. You attempted a rollback to version 22.3.2 for stability, and also encountered problems with the XFX RX6800XT GPU. The most recent available driver is 22.4.1 (link provided). Microsoft’s Windows Debugger Version 10.0.25200.1003 (AMD64) is referenced. All rights reserved – loading Dump File at specified path. Symbol search and executable locations are documented. Analysis indicates a DPC watchdog violation due to prolonged runtime at high IRQL levels. Debugging notes warn about symbol resolution issues; full qualified symbols are required for proper operation.
You're wondering if a 22.3.2 release exists despite trying 22.4.1. Let me check what's available.