Error during gameplay System crashes unexpectedly while playing a game.

F5F Stay Refreshed Software Operating Systems Error during gameplay System crashes unexpectedly while playing a game.

Rantruffs
Member

01-19-2022, 05:03 AM

Hello, I've noticed frequent BSODs while gaming over the past couple of weeks. I've already attempted several fixes: fresh Windows setup, BIOS update, various driver versions (graphics, audio, chipset), memory testing with MemTest86, and an SSD check. My system runs a Ryzen 7 2700X with an HX432C16PB3K2/16 processor, X470 AORUS ULTRA GAMING graphics card, and MSI GeForce GTX 1070 gaming model. I've purchased a new PSU from Corsair and tested different graphics cards including the GC MSI RTX 2060. The most recent BSODs were linked to files like dxgmms2.sys, ntkrnlmp.exe, and memory corruption issues. No overclocking has been done; I've used XMP profiles on RAM. Despite these changes, my PC has functioned normally for nearly two years. Could you offer any advice? I'm happy to share the last three BSOD dump files if needed. Thank you.

Rantruffs

01-19-2022, 05:03 AM #1

legominer7
Junior Member

01-19-2022, 05:03 AM

Check RAM slots 2 and 4. The Ryzen 2000 series can face issues with RAM speeds above 2933MHz, possibly due to instability. Consider raising the SOC voltage to 1.1.

legominer7

01-19-2022, 05:03 AM #2

Check RAM slots 2 and 4. The Ryzen 2000 series can face issues with RAM speeds above 2933MHz, possibly due to instability. Consider raising the SOC voltage to 1.1.

geoleolion
Junior Member

01-19-2022, 05:03 AM

No, the board did not configure the RAM to 1.35V.

geoleolion

01-19-2022, 05:03 AM #3

No, the board did not configure the RAM to 1.35V.

lua34567
Member

136

01-19-2022, 05:03 AM

Thanks, I’m still figuring out the RAM slots. I’ll check them later when I get home. The manual looks a bit unclear, so I’m not entirely sure—maybe RAM is in slots 1 and 2?

lua34567

01-19-2022, 05:03 AM #4

Thanks, I’m still figuring out the RAM slots. I’ll check them later when I get home. The manual looks a bit unclear, so I’m not entirely sure—maybe RAM is in slots 1 and 2?

Tigott
Junior Member

01-19-2022, 05:03 AM

Thank you, I'll review this later at home.

Tigott

01-19-2022, 05:03 AM #5

Thank you, I'll review this later at home.

_DeathTrap_
Member

212

01-19-2022, 05:03 AM

they need to fit into DDR4_2 and DDR4_1 positions, specifically slots 2 and 4 starting from the CPU side toward the right

_DeathTrap_

01-19-2022, 05:03 AM #6

they need to fit into DDR4_2 and DDR4_1 positions, specifically slots 2 and 4 starting from the CPU side toward the right

ImNico7
Junior Member

01-19-2022, 05:03 AM

Alright, I'll review the voltage next. Thanks.

ImNico7

01-19-2022, 05:03 AM #7

Alright, I'll review the voltage next. Thanks.

missingmetal
Member

181

01-19-2022, 05:03 AM

I adjusted the memory voltage to 1.35V and turned off amd cool and quiet, c-state and svm mode in bios. No BSOD for four days, which means the issue appears resolved. Thank you!

missingmetal

01-19-2022, 05:03 AM #8

I adjusted the memory voltage to 1.35V and turned off amd cool and quiet, c-state and svm mode in bios. No BSOD for four days, which means the issue appears resolved. Thank you!