Enhancing my processor performance
Enhancing my processor performance
Hello, thank you for your inquiry. Your computer features a Pegatron M2N68-LA motherboard with an AMD Athlon II 170U single-core processor running at 2.0 GHz, 2 x 2GB RAM, and a total of 4GB memory. It runs on the Zotac GT630 Synergy Edition 250W power supply and is running Windows 7. This is the exact model you found: [link].
On certain websites, it mentions the processor uses an AM2 socket, but the product page clarifies that only AM2+ processors are supported for this board. Your board appears to match the description, though it shows a green color on the site. This discrepancy might matter if you plan to upgrade.
If you check tools like Speccy or CPU-Z, they list the processor as an AM3 socket under the CPU section, but the motherboard’s documentation states Socket AM2. The physical socket on the board is indeed AM2.
For a faster option, you’d need a dual-core processor with a higher clock speed than 2.0GHz. All you’ll share is the thermal design power (TDP) of around 95W.
Regarding the power supply, you’ll likely need an upgrade to match the new CPU’s requirements. As for BIOS adjustments during an upgrade, it depends on the manufacturer’s recommendations—check the official documentation for your motherboard.
Let me know if you need further clarification!
Compaq Presario CQ5000 series setup options are unclear. Legacy boot can be enabled via the F9 menu during startup? A BIOS update might be necessary. The BIOS is from Phoenix Technologies, LTD, version 5.59 dated May 20, 2010. No newer updates appear online. The power supply has a 20-pin and 4-pin configuration, but the lower four pins aren't being utilized—should I upgrade to a 24-pin? The product details are available on eBay links provided. A suitable processor is listed on eBay as well.
To activate Legacy boot you need to navigate into the BIOS settings and locate it. The method varies depending on the specific BIOS model. The required key differs for each system. Typically you'll use F2, F12, Del, F8 or F9. Ensure your processor and power supply are compatible. You don't need to update the BIOS unless the computer boots Windows flawlessly on the first try; otherwise, turn on Legacy boot.
I will set it up and if it doesn’t start, I’ll try again—I’ve ordered it and expect delivery by the end of the week. I’ll update you once I’m working on it. Thank you for your help.
Everything functioned perfectly until this morning when I powered down the computer to install the RAM heatsinks. When I tried to turn it back on, nothing appeared on the screen—everything seemed to boot normally, including fans and the HDD. I've tried a different graphics card, but nothing changed. Any suggestions? EDIT* I rearranged the RAM and it worked fine.