F5F Stay Refreshed Hardware Desktop Enhance memory speed through overclocking.

Enhance memory speed through overclocking.

Enhance memory speed through overclocking.

S
slendermissMC
Junior Member
45
08-18-2016, 11:42 PM
#1
Hello, I'm currently pushing my RAM to its limits, like right now as I write this. So far, I've increased from DDR4 2666 MHz (16-18-18-39) to 3400 MHz (16-17-17-24). I believe I have a very low tRAS setting. I haven't run Memtest yet, but do you think these speeds are realistic right now?
S
slendermissMC
08-18-2016, 11:42 PM #1

Hello, I'm currently pushing my RAM to its limits, like right now as I write this. So far, I've increased from DDR4 2666 MHz (16-18-18-39) to 3400 MHz (16-17-17-24). I believe I have a very low tRAS setting. I haven't run Memtest yet, but do you think these speeds are realistic right now?

E
eth152
Junior Member
30
08-20-2016, 04:57 AM
#2
Overclocking outcomes differ each time due to the randomness of the silicon batch. If it succeeds, your performance shows strong potential—especially with nearly 30% tuning achieved today. However, without extensive testing (like Prime95, OCCT, Memtest), you can't be certain if you've discovered a stable setup.
E
eth152
08-20-2016, 04:57 AM #2

Overclocking outcomes differ each time due to the randomness of the silicon batch. If it succeeds, your performance shows strong potential—especially with nearly 30% tuning achieved today. However, without extensive testing (like Prime95, OCCT, Memtest), you can't be certain if you've discovered a stable setup.

I
i3z___
Senior Member
559
08-24-2016, 08:42 AM
#3
I tested Memtest86 with a 3400 MHz setup and it performed well—no errors for most of the session. I had to stop early because the test was nearing completion. I think I could extend it slightly to 3533 MHz, but I’m not sure. Having a stable configuration gives me confidence.
I
i3z___
08-24-2016, 08:42 AM #3

I tested Memtest86 with a 3400 MHz setup and it performed well—no errors for most of the session. I had to stop early because the test was nearing completion. I think I could extend it slightly to 3533 MHz, but I’m not sure. Having a stable configuration gives me confidence.

T
T_Left
Junior Member
4
08-24-2016, 09:22 AM
#4
I managed to reach 3200MHz without adjusting the settings, which means 16-18-18-39
T
T_Left
08-24-2016, 09:22 AM #4

I managed to reach 3200MHz without adjusting the settings, which means 16-18-18-39