End all operations, halting the program via Blender on CPU.
End all operations, halting the program via Blender on CPU.
When working with Blender, the GPU viewport doesn't render anything, while the CPU viewport causes the system to shut down. I've updated to Windows 11 and BIOS. My setup includes an Ab350 gigabit, RTX 1070, Ryzen 9 5950, 32 GB DDR4, and a 650 W power supply. The temperatures stay below 75°C. The PC powers off, but the lights remain on and fans spin. Only a hard reset gets the system back up.
Which specific PSU is it? Run userbenchmark.com and share the link to your results.
It's a 650 watt device. The benchmark server was fully used for two days, so I ran a 95 test, and it's still working without issues. This only occurs when using Blender viewport render. Also, I used an older version of the software, but the problem persists. Could be related to power or possibly memory.
The specific details about the PSU brand and model are unclear. We require this information. Regarding the RAM, it's important to know the brand and model for compatibility. For instance, Corsair RAM may not work well with Ryzen. The BIOS version on the motherboard is also needed.
On the prime 95 test
Self-test 10K (thread 1 of 2) completed successfully! Runned for approximately an hour without issues.
NumWorkers=4
WorkPreference=0
CoresPerTest=4
ComputerGUID=68ea08ff334ce5abdca7281168fc69fe
StressTester=1
UsePrimenet=0
TortureHyperthreading=1
MinTortureFFT=4
MaxTortureFFT=8192
TortureMem=29696
TortureTime=6
TortureWeak=1048576
[Internals]
OldCpuSpeed=4700
NewCpuSpeedCount=0
NewCpuSpeed=0
V20OptionsConverted=1
WGUID_version=2
Pff indeed, the outcome remains unchanged.
https://flic.kr/p/2pyemWJ
See: https://flickr.com/photos/norbertweijde/53529632990/
This picture was captured with the GPU.
This image was taken with the CPU running one second before shutdown.
De Windows-gegevens van het incident op dit moment zijn niet beschikbaar.