Downclock Ryzen 1700x
Downclock Ryzen 1700x
Ryzen 1700x
ASRock Fatal1ty B450 Gaming-ITX/ac
Hello, I need some guidance. I'm just starting out with overclocking and encountering odd, unexpected results—my goal is to improve performance. The issue began due to inadequate cooling for my Ryzen 1700x (thanks to the small case and weak cooler). I've noticed it begins throttling, so I considered lowering its speed (reducing frequency and voltage) to lower power consumption and avoid overheating. That seemed like a straightforward fix, but it didn’t work.
I began using Ryzen Master Utility. I set the frequency to 3300mhz and voltage to 1.2v, then applied the changes. Nothing changed. Both Ryzen Master and HWinfo still display a peak frequency of 3500mhz, with voltage fluctuating between 1.2 and 1.4v. Prime95 continues to trigger overheating and CPU throttling (I observed this after reaching 95°C during testing).
After checking the motherboard overclocking utility (F-stream tuning), it confirmed the CPU was at 3300mhz with 1.2v. I attempted to increase the frequency in Ryzen Master to 3600mhz, which seemed to resolve the issue. When I then tried lowering it back to 3300mhz, it worked again. This process felt quite confusing.
Eventually, after rebooting, the CPU frequency was reset (Ryzen Master doesn’t retain settings), and I tried setting a lower frequency without success.
In Ryzen Master, the only logical approach is to first increase the clock speed and then decrease it. This method feels quite unusual.
Once I set the frequency to 3300 and 1.2v, running Prime95 confirmed everything was functioning properly—no overheating or throttling. Now I want to apply these values in my BIOS and stop worrying about manual adjustments.
However, after rebooting, I reopened Ryzen Master and found the frequency still at 3500mhz. The CPU continued to overheat during Prime95 tests, suggesting the BIOS settings were overriding.
The only way to downclock my CPU right now is to open Ryzen Master each time I boot up, increase the frequency, and then lower it again.
What’s wrong here? How can I just set a single frequency in the BIOS and ignore the ongoing monitoring and manual tuning? What am I doing incorrectly? Is there a way to bypass these settings so I don’t have to constantly adjust? Please help me resolve this!
Thanks for the feedback. I've also checked Cinebench and been doing rendering tasks, but it's clear the CPU is overheating at stock speed. I'm trying to adjust it to 3300mhz and 1.2v, though the BIOS settings don't seem to change the actual frequency.
I'll attempt this again. But I've already reduced the BIOS settings, since some data suggests the latest BIOS 3.50 might not be suitable for older CPUs. Now I'm going back to 3.40. I plan to try updating once more.
For me, it appears software might interfere with BIOS configurations during system startup. Perhaps tools like F-stream or Ryzen Master influence this, but they aren't loaded at boot, which is a bit unusual.
I attempted to update bios, removed Ryzen Master and F-stream tools. Everything stopped functioning. Bios claimed cpu at 3300, but Windows showed 3492. It's just not working.
You can reach out to Asrock for help or a new motherboard. It seems like this might not be anyone's responsibility, just a simple error. Consider trying to install an older BIOS version if you haven't already.
Do you have any Auto OC settings in BIOS? Also, attempt to disable CSTATs and adjust the maximum CPU power to around 80% in Windows Power Options. Another thing: reset your BIOS to default, navigate to OC settings, and configure voltages/voltage offset to -0.