F5F Stay Refreshed Hardware Desktop Does the system experience a crash when a PCIe WiFi card is connected?

Does the system experience a crash when a PCIe WiFi card is connected?

Does the system experience a crash when a PCIe WiFi card is connected?

Pages (2): Previous 1 2
S
SirDragon_
Member
51
09-07-2022, 05:55 AM
#11
It's not a fixed distortion, but it will bend slightly under force.
S
SirDragon_
09-07-2022, 05:55 AM #11

It's not a fixed distortion, but it will bend slightly under force.

M
MrPowerCube
Junior Member
4
09-07-2022, 10:14 AM
#12
Close to the slot, you are inserting the PCIe card into?
M
MrPowerCube
09-07-2022, 10:14 AM #12

Close to the slot, you are inserting the PCIe card into?

B
Biel_extremer
Member
199
09-07-2022, 11:47 AM
#13
It's a micro-ATX motherboard with the missing stand-off close to the bottom right, and the PCIe card positioned at the bottom left.
B
Biel_extremer
09-07-2022, 11:47 AM #13

It's a micro-ATX motherboard with the missing stand-off close to the bottom right, and the PCIe card positioned at the bottom left.

3
3gilad3
Senior Member
735
09-09-2022, 06:40 AM
#14
Refer to this image. The bigger circle in the lower right should be the focus. Is that accurate?
https://imgur.com/a/rFUdETR
View: https://imgur.com/a/rFUdETR
I added a smaller circle on the heatsink above it, which is where many cases position a standoff to align with the larger hole.
3
3gilad3
09-09-2022, 06:40 AM #14

Refer to this image. The bigger circle in the lower right should be the focus. Is that accurate?
https://imgur.com/a/rFUdETR
View: https://imgur.com/a/rFUdETR
I added a smaller circle on the heatsink above it, which is where many cases position a standoff to align with the larger hole.

P
pocio77
Posting Freak
783
09-09-2022, 10:42 AM
#15
That's the gaping hole. None of those sections are set up for a stand-off right now, which means no connection at the back of the motherboard.
P
pocio77
09-09-2022, 10:42 AM #15

That's the gaping hole. None of those sections are set up for a stand-off right now, which means no connection at the back of the motherboard.

S
SnipeParty
Member
52
09-11-2022, 04:06 AM
#16
I would create a wedge using a non-conductive substance like plastic or cardboard to stabilize that corner, preventing it from bending. After securing it, I would put in the PCIe adapter. Once done, keep the wedge in position and check if your system starts working with the new adapter.
S
SnipeParty
09-11-2022, 04:06 AM #16

I would create a wedge using a non-conductive substance like plastic or cardboard to stabilize that corner, preventing it from bending. After securing it, I would put in the PCIe adapter. Once done, keep the wedge in position and check if your system starts working with the new adapter.

Pages (2): Previous 1 2