Does removing the ASROCK A-tuning restore my settings to their original state before installation?
Does removing the ASROCK A-tuning restore my settings to their original state before installation?
I put A-Tuning in but didn't like it much and learned others had problems with their PCs because of it. As a beginner, I'm cautious about overclocking and want to avoid damaging my setup. After uninstalling, I checked if the settings returned to their original state by switching between the three options. Leaving it on the standard setting helped me confirm the change.
What you observe in the bios is not the complete picture. There are numerous hidden options. Bios serves as the fundamental operating system, defining what functions exist and where components reside. Cmos adds additional commands from Windows, often mistaken for bios itself. Cmos contains a catalog of bios configurations. After a cold boot or reset, the system relies on bios to locate all hardware and implement its settings. When shutting down via Windows, this configuration is stored in cmos and applied during regular startup, significantly speeding up the process since the PC doesn’t need to search or verify manually.
I'm confirming your understanding of the terms. Please clarify if needed.
I got it now, what you meant is clear. If the BIOS isn't using the hard drive with the OS in priority order, it won't find it automatically. This usually doesn't cause issues, but after a BIOS reset or clearing CMOS, Windows should boot fine. However, if no boot media appears, you'll need to manually set the correct drive as the first boot option in BIOS.
What you observe in the bios is not the complete picture. There are numerous hidden options. Bios serves as the fundamental operating system, defining what functions exist and where components reside. Cmos adds additional commands from Windows that modify or include a set of bios configurations.
After a cold boot or reset, the system relies on bios to locate all hardware and implement any configured settings. When you shut down via Windows, this configuration is stored in cmos and during regular startup it takes over as the startup method. This process is significantly quicker since the PC doesn’t need to search, validate, or apply changes manually.
If you altered bios settings using software, those changes remain in cmos. To remove them, a full reset and cold boot are required, forcing bios to reinitialize without any existing startup configuration.
You might also consider using ccleaner (piriform.com) and the registry tool (backup enabled) to eliminate temporary files, orphaned entries, or associations that software attempts to activate, as Windows does not actually remove them.