F5F Stay Refreshed Power Users Networks Do you know where to go on your Linksys router? The address is 10.1.0.1

Do you know where to go on your Linksys router? The address is 10.1.0.1

Do you know where to go on your Linksys router? The address is 10.1.0.1

R
ReporterElProh
Member
71
09-18-2026, 05:57 PM
#1
My Mac Studio is connected to Linksys EA 8300, and that switch is connected to my Spectrum standard modem and router (which are two separate devices). I can't figure out why the router shows on my web page under troubleshooting a destination url or ip of 10.1.0.1. That isn't my router's real webpage address. Under diagnostics in the same tab, the internet address is something like 192.168.x.x. My actual router's webpage address is 10.81.1.1. Is this normal?
R
ReporterElProh
09-18-2026, 05:57 PM #1

My Mac Studio is connected to Linksys EA 8300, and that switch is connected to my Spectrum standard modem and router (which are two separate devices). I can't figure out why the router shows on my web page under troubleshooting a destination url or ip of 10.1.0.1. That isn't my router's real webpage address. Under diagnostics in the same tab, the internet address is something like 192.168.x.x. My actual router's webpage address is 10.81.1.1. Is this normal?

K
kelly1145
Junior Member
11
09-20-2026, 06:49 PM
#2
Those are all private IP addresses so there is no way to say 100% for sure how you have things setup. Someone could have changed the lan to 10.x.x.x but it is not common. Now if there is a second router in the path and it is using the same IP range for its lan someone might have changed it. The 192.168.x.x ip is a private IP that is more commonly used for lan. Start with a IPCONFIG /all command on your pc. The gateway IP will be the IP of the router. Spectrum tends to give you public IP addresses so I am not sure what is going on. It would be common on other ISP to give your wan IP a 10.x.x.x ip and then your router could use 192.168.x.x ip for the lan.
K
kelly1145
09-20-2026, 06:49 PM #2

Those are all private IP addresses so there is no way to say 100% for sure how you have things setup. Someone could have changed the lan to 10.x.x.x but it is not common. Now if there is a second router in the path and it is using the same IP range for its lan someone might have changed it. The 192.168.x.x ip is a private IP that is more commonly used for lan. Start with a IPCONFIG /all command on your pc. The gateway IP will be the IP of the router. Spectrum tends to give you public IP addresses so I am not sure what is going on. It would be common on other ISP to give your wan IP a 10.x.x.x ip and then your router could use 192.168.x.x ip for the lan.