Discussing Cisco switch fiber topics Focus on network infrastructure and connectivity solutions.
Discussing Cisco switch fiber topics Focus on network infrastructure and connectivity solutions.
Hello everyone, here are my queries about the Cisco SG500-52MP switch. I'm aiming for the optimal speed link to the upcoming NAS device.
1) Can the two SFP ports on the far-right be used as regular switch ports for a computer? They're marked G51/SE and G52/S4—uncertain if they're reserved only for trunking or other functions.
2) Are these ports indeed 5 gigabit interfaces? The 1G/5G labeling suggests they support either 1Gbps or 5Gbps speeds, according to the datasheet.
3) What SFP module, connector, and cable should I use to connect the switch to a PC? Is there an adapter that bridges SFP to CAT6 so I can plug directly into a standard network port?
4) Do you have any NIC suggestions for the PC to fully utilize the 5Gbps SFP connection?
Please let me know if you need more details. The current fiber link is connected to the router.
I'm reviewing college basketball and noticed this information about combo ports during the commercials. The relevant data sheet can be found here: https://www.cisco.com/c/en/us/td/docs/ro...011000.pdf
They offer 5GB/1GB combo SFP ports, not the standard SFP+ ports. This seems like an unusual proprietary protocol. You might face difficulties locating a compatible device for your network equipment. It seems designed for combining several switches together.