Discover the features and performance of the Asus ROG STRIX B450-E RAM.

09-11-2018, 08:33 PM

Hello, I have an issue with my Asus ROG STRIX B450-E and 4 RAM stick setup. I can run two sticks at 3200 MHz without any issues in A2/B2, but when I try all four sticks together, they don’t exceed 2133 MHz. My RAM is Corsair Vengeance RGB Pro 4x8 CMW32GX4M4C3600C18W (it was a gift), and my CPU is a Ryzen 2700. Could you help me? Thanks for your support.

Sachouille9

09-11-2018, 08:33 PM #1

BlackSchoky
Junior Member

09-13-2018, 03:17 PM

Check if the BIOS is current. Do you rely on DOCP or manual adjustments?

BlackSchoky

09-13-2018, 03:17 PM #2

Check if the BIOS is current. Do you rely on DOCP or manual adjustments?

RealBudderTree
Junior Member

09-14-2018, 10:40 PM

The BIOS is the final option, and I'm running DOCP at 3200. If I apply DOCP with all four sticks, it won't boot into Windows and I have to switch to full auto at 2133, which functions properly. Using two sticks in a2/b2 with DOCP works well at 3200.

RealBudderTree

09-14-2018, 10:40 PM #3

K31k0
Junior Member

09-14-2018, 11:00 PM

Start with manual adjustments and aim for 2933. Using four kits tends to be more complicated than two.

K31k0

09-14-2018, 11:00 PM #4

Start with manual adjustments and aim for 2933. Using four kits tends to be more complicated than two.

larziboy
Junior Member

09-17-2018, 01:34 AM

I encountered the same problem as well—it looks like a BCLK issue that only gets resolved in Zen2.

larziboy

09-17-2018, 01:34 AM #5

I encountered the same problem as well—it looks like a BCLK issue that only gets resolved in Zen2.

TheAlexZ_
Member

210

09-18-2018, 10:25 AM

The manual refers to using the calculator, or simply setting 2933 and increasing the voltage. Williamcll: Did you get it to function?

TheAlexZ_

09-18-2018, 10:25 AM #6

The manual refers to using the calculator, or simply setting 2933 and increasing the voltage. Williamcll: Did you get it to function?

AhmetUtku
Member

178

09-18-2018, 04:10 PM

Ian entered the configurations directly and checked for consistency. The traditional and dependable method.

AhmetUtku

09-18-2018, 04:10 PM #7

Ian entered the configurations directly and checked for consistency. The traditional and dependable method.

TheMars_
Junior Member

09-28-2018, 02:23 AM

I plan to attempt it in the afternoon and share my results afterward.

TheMars_

09-28-2018, 02:23 AM #8

I plan to attempt it in the afternoon and share my results afterward.

omar1966
Junior Member

09-28-2018, 08:36 AM

Hey, glad you're curious about the results. I'm still figuring things out like you. Thanks for your patience!

omar1966

09-28-2018, 08:36 AM #9

Hey, glad you're curious about the results. I'm still figuring things out like you. Thanks for your patience!

CAMOOO
Member

225

09-30-2018, 04:28 AM

#10

Activate docp then adjust frequency manually to 2933. Or attempt 3200, but boost dram voltage to 1.4

CAMOOO

09-30-2018, 04:28 AM #10

Activate docp then adjust frequency manually to 2933. Or attempt 3200, but boost dram voltage to 1.4