Device switches between states but fails to initialize properly.

F5F Stay Refreshed Hardware Desktop Device switches between states but fails to initialize properly.

Pages (2): 1 2 Next

Meowables
Senior Member

608

07-27-2018, 02:56 PM

Hello, i need some help When i push the power button the fans spin for a moment,turns off then stay on but is not booting. There is no video output. It has happened before but i don't know what fixed it. My spec is: Ryzen 5 3400G Vega 11 2x Xpg 8gb ram ddr4 run at 2600 Psu Voltron bronze 235fx Motherboard Msi a320m pro-vh Ssd Maxun ms120gbx5 I think thats all. Please help.

Meowables

07-27-2018, 02:56 PM #1

xoxo_blonde
Member

159

07-27-2018, 09:25 PM

Check if case power lights operate correctly. Ensure the PSU has a switch; turn it off, wait a minute, then restore power or re-enable it.

xoxo_blonde

07-27-2018, 09:25 PM #2

Check if case power lights operate correctly. Ensure the PSU has a switch; turn it off, wait a minute, then restore power or re-enable it.

_Ninguem_
Member

140

07-29-2018, 09:09 PM

No there is no light,and i have done that.but no luck.

_Ninguem_

07-29-2018, 09:09 PM #3

No there is no light,and i have done that.but no luck.

user_the_boss
Junior Member

07-29-2018, 10:32 PM

I resolved it by clearing the RAM socket and removing the RAM connector. Appreciate your assistance!

user_the_boss

07-29-2018, 10:32 PM #4

I resolved it by clearing the RAM socket and removing the RAM connector. Appreciate your assistance!

CinnamonCici
Junior Member

08-05-2018, 07:43 PM

I'm facing another issue. If I switch the second memory to the second slot, the problem reappears. I've tried different memories, but they still have the same issue.

CinnamonCici

08-05-2018, 07:43 PM #5

I'm facing another issue. If I switch the second memory to the second slot, the problem reappears. I've tried different memories, but they still have the same issue.

shizzle54
Member

210

08-06-2018, 07:35 AM

Test each drive individually; ensure the motherboard has the newest BIOS, or install an update if needed.

shizzle54

08-06-2018, 07:35 AM #6

Test each drive individually; ensure the motherboard has the newest BIOS, or install an update if needed.

KidWatermelon
Member

133

08-09-2018, 03:59 AM

You can try it by following the instructions carefully and checking the results. Let me know if you need more details!

KidWatermelon

08-09-2018, 03:59 AM #7

You can try it by following the instructions carefully and checking the results. Let me know if you need more details!

3gilad3
Senior Member

735

08-09-2018, 09:59 AM

To verify the BIOS, simply press the delete or F key during a reboot and look at the version on the main screen. To assess memory health, run memtest.

3gilad3

08-09-2018, 09:59 AM #8

To verify the BIOS, simply press the delete or F key during a reboot and look at the version on the main screen. To assess memory health, run memtest.

xxLink975xx
Junior Member

08-12-2018, 06:20 PM

I've changed my bios, but now putting the second RAM doesn't let me boot. With just the first RAM it worked fine. It didn’t shut down completely, so I’m unsure how to test the second one. Any suggestions?

xxLink975xx

08-12-2018, 06:20 PM #9

speedycux
Member

187

08-13-2018, 07:40 AM

#10

you place a single RAM stick in the second CPU slot, run a test, then swap it with another stick, keeping only one stick installed. After testing that stick, if it works independently, the remaining slot is faulty.

speedycux

08-13-2018, 07:40 AM #10

Pages (2): 1 2 Next