Device not responding to signals...

F5F Stay Refreshed Hardware Desktop Device not responding to signals...

Gizzyjam12
Member

169

07-17-2018, 02:58 PM

Hey there, just finished setting up my first PC and everything worked smoothly until I turned on DOCP in BIOS. Now my monitor isn’t getting a signal anymore... My motherboard is the ASUS ROG Strix B450-f GAMING II. I’m really unsure what to do and worried something might be wrong.

Gizzyjam12

07-17-2018, 02:58 PM #1

moomintrol
Junior Member

07-17-2018, 08:39 PM

The system reports a default post failure count of three. This indicates the board will attempt the configurations three times, which may take several minutes. If the wait exceeds ten minutes, power down the rig, remove the CMOS, and restart. After rebooting, navigate to BIOS and restore your settings. Good luck!

moomintrol

07-17-2018, 08:39 PM #2

TrueBit
Senior Member

590

07-22-2018, 11:33 PM

Thanks for the info! Initially, I considered removing the tiny battery, but it turns out there are pins on the motherboard to handle the CMOS. 😊

TrueBit

07-22-2018, 11:33 PM #3

Thanks for the info! Initially, I considered removing the tiny battery, but it turns out there are pins on the motherboard to handle the CMOS. 😊

nunbora_
Junior Member

07-24-2018, 02:29 PM

The connector works well. Grab the reset button if you have an outdated case, allowing you to trigger the connections from a distance.

nunbora_

07-24-2018, 02:29 PM #4

The connector works well. Grab the reset button if you have an outdated case, allowing you to trigger the connections from a distance.