Device not recognized, processor overheating, replacement completed.

F5F Stay Refreshed Hardware Desktop Device not recognized, processor overheating, replacement completed.

Device not recognized, processor overheating, replacement completed.

Device not recognized, processor overheating, replacement completed.

S

schnoergelxyz
Junior Member

2

11-13-2016, 12:52 PM

#1

You recently purchased an i5 3470 and installed it properly (refer to the photo). After turning on your PC, your GPU (GTX 1050) wasn't recognized, but your CPU was detected via CPU-Z. The screen resolution remained at 800 x 600 even though it should have been 1920 x 1080 before the replacement, and the system was running very slowly. After a restart, the boot screen displayed an "Overheating Error" and the PC crashed. You've already added a CPU cooler but didn't apply thermal paste, possibly causing the issue. Your original specs included an i3 2100 GTX 1050 with 8 GB RAM, P8H61-M LX3 PLUS R2.0 v0609 BIOS.

S

schnoergelxyz

11-13-2016, 12:52 PM #1

You recently purchased an i5 3470 and installed it properly (refer to the photo). After turning on your PC, your GPU (GTX 1050) wasn't recognized, but your CPU was detected via CPU-Z. The screen resolution remained at 800 x 600 even though it should have been 1920 x 1080 before the replacement, and the system was running very slowly. After a restart, the boot screen displayed an "Overheating Error" and the PC crashed. You've already added a CPU cooler but didn't apply thermal paste, possibly causing the issue. Your original specs included an i3 2100 GTX 1050 with 8 GB RAM, P8H61-M LX3 PLUS R2.0 v0609 BIOS.

_

_TrapBoy_
Member

224

11-14-2016, 02:50 PM

#2

You can't just put a CPU in without thermal paste and hope it works well for over 30 seconds.

_

_TrapBoy_

11-14-2016, 02:50 PM #2

You can't just put a CPU in without thermal paste and hope it works well for over 30 seconds.

C

Commando__
Senior Member

744

11-15-2016, 02:18 PM

#3

I'm just starting out with this task.

C

Commando__

11-15-2016, 02:18 PM #3

I'm just starting out with this task.

S

Siphan0
Member

74

11-15-2016, 03:40 PM

#4

You should apply thermal paste to the CPU and consider using a cooler to effectively manage heat and release it into the case.

S

Siphan0

11-15-2016, 03:40 PM #4

You should apply thermal paste to the CPU and consider using a cooler to effectively manage heat and release it into the case.

Z

zzdark_br
Junior Member

4

11-20-2016, 08:00 AM

#5

Check YouTube for CPU installation guides. They’ll help you get started.

Z

zzdark_br

11-20-2016, 08:00 AM #5

Check YouTube for CPU installation guides. They’ll help you get started.

I

imTri
Posting Freak

786

11-22-2016, 06:17 AM

#6

You must use thermal paste, otherwise your CPU cooler won't really help much.

I

imTri

11-22-2016, 06:17 AM #6

You must use thermal paste, otherwise your CPU cooler won't really help much.