F5F Stay Refreshed Hardware Desktop Device hangs in continuous startup cycle

Device hangs in continuous startup cycle

Device hangs in continuous startup cycle

S
SW_kail
Member
Find
68
04-14-2018, 01:29 PM
#1
Hello, this began when I removed the radiator from my Kraken X52 to clear out dust. After putting it back in, the system started up but kept grinding noises from the pump. I thought an air bubble was stuck and shook the PC to release it, but it didn’t work. I then powered off the system, took out the radiator, and placed it above the block with the PC tilted so air could reach it. When I turned it back on, it entered a random boot loop with the motherboard repeatedly displaying error codes. I’m using a Z390 Aorus Ultra and the latest error is “C1.” I managed to fix the cooler issue with one stick in the BIOS, but it still won’t boot when both sticks are inserted. I found a solution here: https://imgur.com/a/18I4OjL
Reply
Reply
S
SW_kail
04-14-2018, 01:29 PM #1

Hello, this began when I removed the radiator from my Kraken X52 to clear out dust. After putting it back in, the system started up but kept grinding noises from the pump. I thought an air bubble was stuck and shook the PC to release it, but it didn’t work. I then powered off the system, took out the radiator, and placed it above the block with the PC tilted so air could reach it. When I turned it back on, it entered a random boot loop with the motherboard repeatedly displaying error codes. I’m using a Z390 Aorus Ultra and the latest error is “C1.” I managed to fix the cooler issue with one stick in the BIOS, but it still won’t boot when both sticks are inserted. I found a solution here: https://imgur.com/a/18I4OjL

Reply
Reply