F5F Stay Refreshed Hardware Desktop Device fails to turn on after being dropped.

Device fails to turn on after being dropped.

Device fails to turn on after being dropped.

C
Crazydog300
Senior Member
599
01-07-2019, 07:35 AM
#1
I placed my PC inside its case and accidentally dropped it halfway, landing it in the box with the Styrofoam. When I turned it on and connected the peripherals, they lit up with RGB but didn’t power up. Could the power supply be the problem, even though the RGB lights worked?
C
Crazydog300
01-07-2019, 07:35 AM #1

I placed my PC inside its case and accidentally dropped it halfway, landing it in the box with the Styrofoam. When I turned it on and connected the peripherals, they lit up with RGB but didn’t power up. Could the power supply be the problem, even though the RGB lights worked?

9
905xA
Senior Member
667
01-07-2019, 11:00 AM
#2
Inspect your 24-pin ATX and 12V EPS connectors. Verify the PCIe connectors on your graphics card if available. Ensure both ends are present on the boards and the PSU.
9
905xA
01-07-2019, 11:00 AM #2

Inspect your 24-pin ATX and 12V EPS connectors. Verify the PCIe connectors on your graphics card if available. Ensure both ends are present on the boards and the PSU.

P
P1NG3S
Member
50
01-07-2019, 12:56 PM
#3
It seems the system expects confirmation that power activation works. No visible output? Are fans running? Are there any status LEDs on the mainboard? RAM and GPU should be properly connected.
P
P1NG3S
01-07-2019, 12:56 PM #3

It seems the system expects confirmation that power activation works. No visible output? Are fans running? Are there any status LEDs on the mainboard? RAM and GPU should be properly connected.

J
JTPaperJam
Member
140
01-07-2019, 06:10 PM
#4
Hi. Ye so when I press the power button on my front pc there is no power to the system. No fans spin or nothing starts. I've checked the 24 pin connector and the cpu connector and nothings changed. I've bought a new psu and motherboard and replaced both yet there is not power when I press the power button. No fans spins. Nothing comes on. I even bought a atx motherboard switch (on/off) power cable thinking that might be the issue but thats not the case either. Not sure what to do
J
JTPaperJam
01-07-2019, 06:10 PM #4

Hi. Ye so when I press the power button on my front pc there is no power to the system. No fans spin or nothing starts. I've checked the 24 pin connector and the cpu connector and nothings changed. I've bought a new psu and motherboard and replaced both yet there is not power when I press the power button. No fans spins. Nothing comes on. I even bought a atx motherboard switch (on/off) power cable thinking that might be the issue but thats not the case either. Not sure what to do