Device fails to start after BIOS reset to default configuration.
Device fails to start after BIOS reset to default configuration.
Hello, I performed a factory reset of my BIOS yesterday. After that, the PC shut down completely and couldn't even load the BIOS when I tried. When checking my graphics card, it seems like it's attempting to boot in a loop. I've already tried resetting the CMOS using the button on the motherboard and loaded without connecting any drives. Could you offer some suggestions?
Replace your CPU cooler and remove the CPU. Then reinstall it, ensuring no bent pins are present on the motherboard or processor. Secure it using the lever. For GPU, press the PCIe slot handle, extract it, and reinsert it carefully (note the click).
Upgrade your RAM and verify proper CPU cooling connection. Check that all power cables are firmly connected. Ensure the CPU cooler is in good contact with the CPU.
I did this to clarify your question. When you power on your PC, you might notice no visible lights or sounds coming from the motherboard. This can happen if the front panel connectors aren’t properly seated in the correct ports. Make sure everything is aligned correctly for a smooth start-up.