Device fails to power up. Check connections and power source.
Device fails to power up. Check connections and power source.
I assembled a new computer yesterday. Once it powered up, I received a beep—one long followed by three short sounds. The fans were running and the GPU was functioning properly, but there was no display output. This suggests an issue with the RAM on the ASUS motherboard. I reinserted the RAM and repeated the test in various slots. The previous attempt resulted in the PC failing to start at all, with no fan activity.
I suspect a GPU issue, as my ASUS motherboard had problems a few months ago. The GPU cable and card didn’t sit properly either. If this applies to you, remove the GPU, reinsert it carefully, verify it’s fully seated, then check the cable. For modular power supplies, ensure the GPU power cable fits snugly into the PSU.
The brand is unknown, the wattage isn't specified, and the rating isn't mentioned. It seems the product didn't perform as expected after short use.
This seems like a logical approach. A fresh power source might be the answer.