Device fails to power on via USB connection.

F5F Stay Refreshed Software Operating Systems Device fails to power on via USB connection.

111carys111
Posting Freak

832

10-05-2016, 03:03 AM

Check your setup carefully. The Gigabyte boards sometimes face issues loading from USB sticks, especially without a pre-installed OS. Since you haven’t installed any system yet, try creating a bootable Windows 7 USB yourself. Make sure the BIOS settings are correct and that the drive is properly recognized. If problems persist, consider using a different USB stick or consulting official Gigabyte support resources.

111carys111

10-05-2016, 03:03 AM #1

Laur0305
Junior Member

10-20-2016, 08:33 PM

Use a USB2 connection if you haven't already.

Laur0305

10-20-2016, 08:33 PM #2

Use a USB2 connection if you haven't already.

eskzz
Posting Freak

909

10-21-2016, 02:08 AM

You configured it to boot using the BIOS stick, but nothing appears in the MBR to start. You loaded the ISO onto the stick with WinUSB, also tried uneboot first without success, and used both 2.0 and 3.0 ports.

eskzz

10-21-2016, 02:08 AM #3

Swagasauras
Junior Member

10-21-2016, 04:23 AM

Use Rufus to create a bootable USB drive. https://rufus.akeo.ie/

Swagasauras

10-21-2016, 04:23 AM #4

Use Rufus to create a bootable USB drive. https://rufus.akeo.ie/

THE_KILLER_
Member

10-21-2016, 06:47 AM

Thank you, it worked perfectly, started immediately after creating the stick with rufus.

THE_KILLER_

10-21-2016, 06:47 AM #5

Thank you, it worked perfectly, started immediately after creating the stick with rufus.