Device fails to power on after installation.
Device fails to power on after installation.
I'm setting up my initial PC but it won't turn on. The fans aren't rotating. The EZ Debug indicator isn't illuminating. I attempted to connect the power switch directly instead of using the case's power button, but that didn't resolve the issue. I verified the PSU with a paper clip test as per the guide at the provided link and it functioned correctly. The fan began spinning briefly before stopping, which aligns with the site's description. When I pressed the "Flash BIOS Button," the red light activated, suggesting the motherboard was receiving power. I confirmed the ATX is plugged in and the CPU power cable is connected, and the PSU is powered on and linked to the supply. I've re-seated all components, yet the problem persists.
I refer to the guidance on the provided website. Set up a USB connection and connect it to the flash BIOS slot. Activate the flash BIOS function. All fans (power supply, processor, case) begin spinning. The flash BIOS indicator continues to light up. For the EZ Debug LED, the CPU displays a red light while the other indicators remain off. I’m uncertain if this signals a problem with the CPU. Later, I examined the CPU socket—everything appears correct. No thermal paste is touching the pins. After some time, the system shuts down. Removing the USB and pressing the power button yields no response.
Yes, the problem has been resolved. Let me know if you need further assistance.