F5F Stay Refreshed Hardware Desktop Device activates only after CMOS is cleared and restarts

Device activates only after CMOS is cleared and restarts

Device activates only after CMOS is cleared and restarts

C
cookiegal1410
Member
219
02-08-2021, 07:11 AM
#1
Setup details: Ryzen 5 1600 with Asrock Radeon 6700 XT, HyperX Fury 2400 at 2400 MHz DDR4 (2x 8GB) installed in slots A2 and B2. Motherboard is an Asus Rog Strix B350F with Samsung NVMe M.2 SSD (980 GB, 1 TB), Windows drive, and Samsung Evo 860 250 GB WD Blue 1 TB. BIOS version 6203 was updated recently. The system performed well for a month before issues began. After resetting CMOS and performing a "discard and exit" in BIOS, the PC started functioning properly. If saved and exited, it didn’t boot. A white LED lit up on the motherboard indicating GPU problems, even with the old GPU still present.

Tried several fixes: using only one RAM stick, replacing CMOS battery, changing PCIe slot, switching to another GPU slot, and reverting back. Also installed Steelseries GG suite for a new mouse, but it didn’t work. Currently, only a standard keyboard is connected for testing. Need advice or assistance. Appreciate any help!
C
cookiegal1410
02-08-2021, 07:11 AM #1

Setup details: Ryzen 5 1600 with Asrock Radeon 6700 XT, HyperX Fury 2400 at 2400 MHz DDR4 (2x 8GB) installed in slots A2 and B2. Motherboard is an Asus Rog Strix B350F with Samsung NVMe M.2 SSD (980 GB, 1 TB), Windows drive, and Samsung Evo 860 250 GB WD Blue 1 TB. BIOS version 6203 was updated recently. The system performed well for a month before issues began. After resetting CMOS and performing a "discard and exit" in BIOS, the PC started functioning properly. If saved and exited, it didn’t boot. A white LED lit up on the motherboard indicating GPU problems, even with the old GPU still present.

Tried several fixes: using only one RAM stick, replacing CMOS battery, changing PCIe slot, switching to another GPU slot, and reverting back. Also installed Steelseries GG suite for a new mouse, but it didn’t work. Currently, only a standard keyboard is connected for testing. Need advice or assistance. Appreciate any help!

R
RandomJaZ
Junior Member
42
02-08-2021, 09:33 PM
#2
The brand is Samsung and the model is PSU.
R
RandomJaZ
02-08-2021, 09:33 PM #2

The brand is Samsung and the model is PSU.

N
ninja1221
Junior Member
3
03-01-2021, 07:29 PM
#3
Seasonic M12 II Bronze 620 Evo edition
N
ninja1221
03-01-2021, 07:29 PM #3

Seasonic M12 II Bronze 620 Evo edition

D
Dred22
Junior Member
12
03-03-2021, 01:05 PM
#4
I updated Windows and adjusted the BIOS settings. It appeared to resolve the issue temporarily.
D
Dred22
03-03-2021, 01:05 PM #4

I updated Windows and adjusted the BIOS settings. It appeared to resolve the issue temporarily.