F5F Stay Refreshed Hardware Desktop Determining a steady clock for mixed RAM

Determining a steady clock for mixed RAM

Determining a steady clock for mixed RAM

T
Tojamz
Member
213
08-22-2016, 07:07 AM
#1
I adjusted the ASUS motherboard settings to match a common speed. Checked CPU-Z for the correct speeds and voltages. Slots 1 and 3 were higher, so I set them to 3200. The BIOS voltage was 1.5, which seemed too high—maybe it should be lower. XMP didn’t work with all sticks, so I’ll verify those settings next time.
T
Tojamz
08-22-2016, 07:07 AM #1

I adjusted the ASUS motherboard settings to match a common speed. Checked CPU-Z for the correct speeds and voltages. Slots 1 and 3 were higher, so I set them to 3200. The BIOS voltage was 1.5, which seemed too high—maybe it should be lower. XMP didn’t work with all sticks, so I’ll verify those settings next time.

L
LebanoFR
Junior Member
10
08-22-2016, 02:29 PM
#2
Adjust to the slower sticks' specifications (like 2400). The quicker sticks should typically keep up, but remember: avoid buying sticks expecting mixed speeds—think of it as mixing drag rails with front tires on a dirt buggy.
L
LebanoFR
08-22-2016, 02:29 PM #2

Adjust to the slower sticks' specifications (like 2400). The quicker sticks should typically keep up, but remember: avoid buying sticks expecting mixed speeds—think of it as mixing drag rails with front tires on a dirt buggy.

U
Unmigrate
Senior Member
644
08-23-2016, 01:55 AM
#3
A few folks purchase prebuilt units, but the sole additional piece available is a slow one. Don’t worry if I’m mistaken—since you have two options, it’s likely you won’t exceed 2400.
U
Unmigrate
08-23-2016, 01:55 AM #3

A few folks purchase prebuilt units, but the sole additional piece available is a slow one. Don’t worry if I’m mistaken—since you have two options, it’s likely you won’t exceed 2400.

T
ThatSoftware
Member
221
08-24-2016, 02:00 PM
#4
I would set the timings manually to 1 6 -15-15-15-35-50 1.25v and try it. If using 1 5 -15-15-15-35-50, turn off gear down mode. Also disable power down mode. Begin at 2133mhz and increase gradually. It halts when it stops. Return to the last stable bootable version and verify stability.
T
ThatSoftware
08-24-2016, 02:00 PM #4

I would set the timings manually to 1 6 -15-15-15-35-50 1.25v and try it. If using 1 5 -15-15-15-35-50, turn off gear down mode. Also disable power down mode. Begin at 2133mhz and increase gradually. It halts when it stops. Return to the last stable bootable version and verify stability.

_
_M60_
Member
56
08-24-2016, 08:45 PM
#5
I purchased it because it was on sale.
_
_M60_
08-24-2016, 08:45 PM #5

I purchased it because it was on sale.

C
Clemson1221
Junior Member
8
08-24-2016, 09:11 PM
#6
It's great you spotted a Ryzen 5000 for a good price! To run it on an X470, make sure you have the right setup. Keep your old components as backups and swap them in when needed. Only buy what you can genuinely use as intended.
C
Clemson1221
08-24-2016, 09:11 PM #6

It's great you spotted a Ryzen 5000 for a good price! To run it on an X470, make sure you have the right setup. Keep your old components as backups and swap them in when needed. Only buy what you can genuinely use as intended.

L
LionSpear
Member
214
08-25-2016, 04:50 AM
#7
6600K, Asus Z170M+, 1050 ti. The reason for the 32gb of RAM is to avoid closing all Chrome tabs while playing games, especially War Thunder. It tends to lag when using Chrome and launching the game.
L
LionSpear
08-25-2016, 04:50 AM #7

6600K, Asus Z170M+, 1050 ti. The reason for the 32gb of RAM is to avoid closing all Chrome tabs while playing games, especially War Thunder. It tends to lag when using Chrome and launching the game.

C
Christy82
Member
52
08-26-2016, 10:59 AM
#8
Thank you for the suggestion, but I used it on the FB marketplace for a better price.
C
Christy82
08-26-2016, 10:59 AM #8

Thank you for the suggestion, but I used it on the FB marketplace for a better price.