Determine the required voltage for your 3200LPX to reach 3600MHz.

wANHEiZER
Member

158

11-01-2016, 04:47 PM

I used 3600mhz without boosting the voltage and ended up returning to the BIOS because the overclock didn’t work.

wANHEiZER

11-01-2016, 04:47 PM #1

I used 3600mhz without boosting the voltage and ended up returning to the BIOS because the overclock didn’t work.

mellon890
Junior Member

11-01-2016, 06:26 PM

What voltage base are you referring to? A common guideline is to begin with 0.07.

mellon890

11-01-2016, 06:26 PM #2

What voltage base are you referring to? A common guideline is to begin with 0.07.

Asweetliar
Member

11-07-2016, 09:14 AM

Enjoy experimenting with pushing an LPX setup, but it seems you're not quite reaching the XMP limits.

Asweetliar

11-07-2016, 09:14 AM #3

Enjoy experimenting with pushing an LPX setup, but it seems you're not quite reaching the XMP limits.

Sk8ter10
Junior Member

11-07-2016, 06:05 PM

voltage level was set to 1.35 volts.

Sk8ter10

11-07-2016, 06:05 PM #4

voltage level was set to 1.35 volts.

DarkMosaic
Junior Member

11-09-2016, 12:29 PM

I own two distinct versions of Corsair LPX 3200. One uses SK Hynix M die and the other uses Samsung B die. Both handle 3200 smoothly using XMP settings, but the Hynix version doesn’t support any overclocking. The Samsung model can reach 3600, though it requires higher voltages up to 1.4v, which I believe Samsung struggles with at those levels for stability. Based on this, I think running it at 3200 is the best choice. That’s what I followed.