F5F Stay Refreshed Hardware Desktop Debugging guide for A6 (or Ab??) on Gigabyte B550 vision board.

Debugging guide for A6 (or Ab??) on Gigabyte B550 vision board.

Debugging guide for A6 (or Ab??) on Gigabyte B550 vision board.

P
PowergirlA
Member
Find
229
12-17-2020, 07:59 AM
#1
Hello everyone, I hope everything is fine for those who read this. I’m seeking assistance with the A6 (or possibly Ab) debug code. I believed the problem was related to my display port cable, but plugging it into the GPU and monitor didn’t resolve it. The error description for A6 says "Detect and install all currently connected SCSI devices," while Ab reports "CPU DXE initialization is started." The screen is black except for the fans, cooler, and LED, all functioning normally, but there’s no post at all. I’ll share an image of the code since I’m uncertain if it matches A6 or Ab, and I’ll also list my PC components below. Thanks to all. My build details: Gigabyte RTX 3090, Ryan 9 5950x, Gigabyte B550 VISION D-P DDR4, Corsair Vengeance 8GB x4, SF850 PSU GOLD+, ADATA 2TB XPG SX8200 Pro, PCIe Lian Li Galahad 240mm, O11 Dynamic Mini.
Reply
Reply
P
PowergirlA
12-17-2020, 07:59 AM #1

Hello everyone, I hope everything is fine for those who read this. I’m seeking assistance with the A6 (or possibly Ab) debug code. I believed the problem was related to my display port cable, but plugging it into the GPU and monitor didn’t resolve it. The error description for A6 says "Detect and install all currently connected SCSI devices," while Ab reports "CPU DXE initialization is started." The screen is black except for the fans, cooler, and LED, all functioning normally, but there’s no post at all. I’ll share an image of the code since I’m uncertain if it matches A6 or Ab, and I’ll also list my PC components below. Thanks to all. My build details: Gigabyte RTX 3090, Ryan 9 5950x, Gigabyte B550 VISION D-P DDR4, Corsair Vengeance 8GB x4, SF850 PSU GOLD+, ADATA 2TB XPG SX8200 Pro, PCIe Lian Li Galahad 240mm, O11 Dynamic Mini.

Reply
Reply
T
timo_1892
Senior Member
Find
715
12-17-2020, 08:14 AM
#2
I found myself seated, doing nothing, and suddenly it shifted to 64...what? The screen remained dark with no post.
Reply
Reply
T
timo_1892
12-17-2020, 08:14 AM #2

I found myself seated, doing nothing, and suddenly it shifted to 64...what? The screen remained dark with no post.

Reply
Reply
K
KochJus7in
Member
Find
59
12-18-2020, 03:37 PM
#3
Is this a fresh installation? Does it occur immediately after all components are added? Or was the system already functioning beforehand? Consider resetting the CMOS at that time.
Reply
Reply
K
KochJus7in
12-18-2020, 03:37 PM #3

Is this a fresh installation? Does it occur immediately after all components are added? Or was the system already functioning beforehand? Consider resetting the CMOS at that time.

Reply
Reply