DDR4 3000 RAM performing at 2666 MHz
DDR4 3000 RAM performing at 2666 MHz
Hey there, I see you're facing a tricky RAM setup issue. It sounds like your system is trying to run at 3000 MHz but the BIOS keeps it at 2666 or 2714. Have you checked if the RAM sticks are properly seated and if they match the specifications? Also, make sure the motherboard supports the frequency you're trying to use. You might want to consult the official AMD documentation or a trusted tech forum for guidance on adjusting the BIOS settings safely. Let me know if you need more help!
Avoid using the task manager as it tends to give incorrect data. Consider tools like hwinfo64 or cpu-z to check memory usage patterns. If readings match, install RAM in slots 2 and 4, configure the chipset to 1.1 Dram at 1.35, set the clock speed to 3000, and try booting. After startup, run memtest86 and OCCT to ensure stability. Good luck!
Make sure you reviewed the QVL for your motherboard—it indicates its supported speed and whether your memory is compatible. Did you turn on XMP/DOCP for your RAM? What voltage settings are you applying to the RAM or SoC?
Hello, thank you for your message. Based on the information from the site, your RAM should work with your system. You didn’t enable XMP/DOCP and your voltage settings match the recommended values. The BIOS adjustments seem correct, and tools like hwinfo64 and cpu-z confirmed the readings. If memtest86 reports a different stable value, it might be due to a software glitch or incorrect driver configuration. Try reinstalling the drivers or checking for updates.
Thanks for the support, mods! I'll make sure to keep the thread active so you can test my ideas. Looking forward to your feedback soon.