F5F Stay Refreshed Hardware Desktop Curve optimizer set to -30

Curve optimizer set to -30

Curve optimizer set to -30

T
TimeArchon
Member
Find
198
08-04-2020, 08:59 PM
#1
You're currently at -30 on the curve optimizer for your Ryzen 5600X. To improve further, focus on lowering the VCore rather than increasing power. Check the recommended settings and adjust accordingly.
Reply
Reply
T
TimeArchon
08-04-2020, 08:59 PM #1

You're currently at -30 on the curve optimizer for your Ryzen 5600X. To improve further, focus on lowering the VCore rather than increasing power. Check the recommended settings and adjust accordingly.

Reply
Reply
D
Darkaimonds
Member
Find
74
08-04-2020, 10:19 PM
#2
Plus 200 and give it loose
Reply
Reply
D
Darkaimonds
08-04-2020, 10:19 PM #2

Plus 200 and give it loose

Reply
Reply
V
VortexAh
Member
Find
160
08-05-2020, 06:47 AM
#3
The maximum boost clock adjustment is limited to +200; exceeding this value isn't possible.
Reply
Reply
V
VortexAh
08-05-2020, 06:47 AM #3

The maximum boost clock adjustment is limited to +200; exceeding this value isn't possible.

Reply
Reply
X
xCre8x
Member
Find
52
08-05-2020, 09:14 AM
#4
You've reached your maximum limit of 4850. Focus on improving your FCLK and see if you can achieve a 2000 1:1 stable connection.
Reply
Reply
X
xCre8x
08-05-2020, 09:14 AM #4

You've reached your maximum limit of 4850. Focus on improving your FCLK and see if you can achieve a 2000 1:1 stable connection.

Reply
Reply
S
sniper3609
Member
Find
59
08-06-2020, 12:48 PM
#5
I haven't reached the limit at 4850. The peak speed across all cores isn't what I expected—around 4475. With a +200 MHz boost, it hits 4675 MHz. I'm more focused on adjusting the VCore. If I set the same VCore with 4675 MHz (about 1.172V), it should reach 4800 MHz. I don't mind, because I can't go higher in the curve optimizer or use the boost clock override to lower the VCore further.
Reply
Reply
S
sniper3609
08-06-2020, 12:48 PM #5

I haven't reached the limit at 4850. The peak speed across all cores isn't what I expected—around 4475. With a +200 MHz boost, it hits 4675 MHz. I'm more focused on adjusting the VCore. If I set the same VCore with 4675 MHz (about 1.172V), it should reach 4800 MHz. I don't mind, because I can't go higher in the curve optimizer or use the boost clock override to lower the VCore further.

Reply
Reply
L
lokapso_SP
Member
Find
77
08-09-2020, 07:40 PM
#6
Increase PPT, TDC, EDC levels. Optimize performance to 4850 across all cores, achieving 4600 under heavy stress.
Reply
Reply
L
lokapso_SP
08-09-2020, 07:40 PM #6

Increase PPT, TDC, EDC levels. Optimize performance to 4850 across all cores, achieving 4600 under heavy stress.

Reply
Reply
C
Camiloute
Member
Find
52
08-10-2020, 12:51 AM
#7
Check the PPT, TDC and EDC settings. Likely use auto mode or set MBB values. Avoid temperatures above 70°C. In normal tests on Cinebench, OCCT and AIDA64 I’m targeting a max of 70°C. Prime95 requires higher temps with an additional stress test.
Reply
Reply
C
Camiloute
08-10-2020, 12:51 AM #7

Check the PPT, TDC and EDC settings. Likely use auto mode or set MBB values. Avoid temperatures above 70°C. In normal tests on Cinebench, OCCT and AIDA64 I’m targeting a max of 70°C. Prime95 requires higher temps with an additional stress test.

Reply
Reply
T
TehStratosHD
Senior Member
Find
492
08-11-2020, 03:08 AM
#8
80 is fine. You have to set the limits manually. Don’t ask me about Ryzen master that program is a turd
Reply
Reply
T
TehStratosHD
08-11-2020, 03:08 AM #8

80 is fine. You have to set the limits manually. Don’t ask me about Ryzen master that program is a turd

Reply
Reply