Current configuration triggers memory management error screen.
Current configuration triggers memory management error screen.
Hey there, I just finished setting up my system. I used a Ryzen 5 7600X with Nzxt n7 b650e, a Corsair vengeance cl36 64gb (4x16) ASRock steel legend RX 7800 XT, Deepcool 360mm AIO, and a Hyte y40 case. At first I thought it was the motherboard since I swapped it from an Asus ROG Strix B650e, but the blue screen kept appearing. I haven’t overclocked my RAM, yet it’s still facing constant memory management BSODs. I ran Memtest86+ and saw errors on test 10 sleeping, but I’m not familiar with all the steps. Any advice or help would be greatly appreciated. Thanks!
Ram is showing instability. Determine the speed. If XMP/DOCP/EXPO are enabled, consider reducing them. The issue may be a faulty RAM or just performance limits at higher speeds.
The RAM and board use DDR5 technology. Try using two sticks in ports 2 and 4, then switch to one stick if needed. If that fails, test with just a single stick. Rotate through each stick to ensure stability. Also check the RAM contacts and ports; make sure they’re properly seated.
Both RAM and the motherboard support DDR5. I tested one stick at a time, but all four failed during test 10 on MemTest86. The issue might be related to the memory controller or compatibility with your system. It seems similar problems occurred with the Asus ROG Strix B650A as well.
Suggest trying a different memory kit initially, though its performance isn't optimal for your setup. I've also faced similar memory management issues before, linked to CPB and the CPU. You might want to turn off CPB and retest—this could resolve the problem.