F5F Stay Refreshed Power Users Overclocking CPU Temps OC

CPU Temps OC

CPU Temps OC

M
Mel_Kawaii
Member
Find
182
07-27-2016, 11:19 PM
#1
6700k, MSI Krait Gaming 3x, 1080 FE, Kraken x52.
Maintaining just below 70C while running P95 26.6 Small FFTs for about ten minutes. The peak temperatures occur immediately after P95 begins, before the fans reach full speed. Currently I'm at 4.8GHz @ 1.350V. This is my first attempt at a proper overclock. Previously, I'd set it to 4.8 @ 1.4 and it worked without issues. Now I'm wondering what's next? Should I lower the voltage to discover the minimum it can handle during P95, or try 4.9 and check which voltage is stable? Or am I satisfied with this performance and move forward?
https://gyazo.com/cd20c127e999e5622d1f3c097122c629
Within a few seconds of stopping
https://gyazo.com/6f40e704dfd4f5dd752c4276d8eef592
Reply
Reply
M
Mel_Kawaii
07-27-2016, 11:19 PM #1

6700k, MSI Krait Gaming 3x, 1080 FE, Kraken x52.
Maintaining just below 70C while running P95 26.6 Small FFTs for about ten minutes. The peak temperatures occur immediately after P95 begins, before the fans reach full speed. Currently I'm at 4.8GHz @ 1.350V. This is my first attempt at a proper overclock. Previously, I'd set it to 4.8 @ 1.4 and it worked without issues. Now I'm wondering what's next? Should I lower the voltage to discover the minimum it can handle during P95, or try 4.9 and check which voltage is stable? Or am I satisfied with this performance and move forward?
https://gyazo.com/cd20c127e999e5622d1f3c097122c629
Within a few seconds of stopping
https://gyazo.com/6f40e704dfd4f5dd752c4276d8eef592

Reply
Reply
R
Razlorus
Posting Freak
Find
976
08-04-2016, 02:11 PM
#2
It depends on your preference whether you choose to stop there and fine-tune or push it all the way to 4.9.
I’d go for a 4.8ghz OC, but of course, everyone’s different.
Reply
Reply
R
Razlorus
08-04-2016, 02:11 PM #2

It depends on your preference whether you choose to stop there and fine-tune or push it all the way to 4.9.
I’d go for a 4.8ghz OC, but of course, everyone’s different.

Reply
Reply
L
Lorddoom139
Posting Freak
Find
956
08-07-2016, 03:09 AM
#3
It depends on your preference whether you choose to stop there and dial in or push it further for a 4.9. I’d begin dialing in, aiming for a solid 4.8ghz OC, though everyone’s setup is different. I’ll check if I can maintain stability at 4.9 under 1.4v; I managed to keep things steady at 1.46v before, so comfort with my voltages seems to be the key.
Reply
Reply
L
Lorddoom139
08-07-2016, 03:09 AM #3

It depends on your preference whether you choose to stop there and dial in or push it further for a 4.9. I’d begin dialing in, aiming for a solid 4.8ghz OC, though everyone’s setup is different. I’ll check if I can maintain stability at 4.9 under 1.4v; I managed to keep things steady at 1.46v before, so comfort with my voltages seems to be the key.

Reply
Reply