CPU fan operates normally at startup but halts during BIOS or Windows installation.

F5F Stay Refreshed Hardware Desktop CPU fan operates normally at startup but halts during BIOS or Windows installation.

Pages (2): Previous 1 2

Theomanduff
Member

197

03-22-2019, 02:08 PM

#11

Yes, the "QFLASH PLUS" button should function.

Theomanduff

03-22-2019, 02:08 PM #11

Yes, the "QFLASH PLUS" button should function.

NuCleARz
Member

03-29-2019, 12:38 AM

#12

That’s about flashing BIOS without a CPU installed. If you need to open the case, an old method is to connect the reset button from a previous case to the clear CMOS jumpers.

NuCleARz

03-29-2019, 12:38 AM #12

That’s about flashing BIOS without a CPU installed. If you need to open the case, an old method is to connect the reset button from a previous case to the clear CMOS jumpers.

Unreckable
Member

03-29-2019, 09:37 AM

#13

That is actually a neat trick heheh...... anyways its so odd .... i unplugged the fan and it doesnt care.... it just ignores the fact there is no cpu fan.... the rest of the system fans work fine..... its just the cpu fan in the cpu fan header..... even when it was plugged in the fan utility either on bios or windows just register 0 rpm even if you calibrate it.... itll just go through the process as if its there working.... wont say its not connected or not working.... wtf

Unreckable

03-29-2019, 09:37 AM #13

gavinom123
Member

191

03-29-2019, 03:46 PM

#14

The bios appears partially corrupted. Suggest removing the CMOS and reprogramming the board. If needed, try a different fan header. As a final option, consider warranty service for the board.

gavinom123

03-29-2019, 03:46 PM #14

The bios appears partially corrupted. Suggest removing the CMOS and reprogramming the board. If needed, try a different fan header. As a final option, consider warranty service for the board.

Justicemonkey
Member

210

04-03-2019, 10:58 AM

#15

CMOS remains faulty. I'm updating the BIOS now—CPU fan is running while this happens. It will spin as long as I'm not in the BIOS or Windows.

Justicemonkey

04-03-2019, 10:58 AM #15

CMOS remains faulty. I'm updating the BIOS now—CPU fan is running while this happens. It will spin as long as I'm not in the BIOS or Windows.

Gabokazu
Posting Freak

814

04-03-2019, 11:50 AM

#16

It's still not working properly. The CMOS is cleared and the BIOS was reflashed, but it keeps failing to run when I'm at the BIOS or Windows. Ugh, that's really annoying.

Gabokazu

04-03-2019, 11:50 AM #16

It's still not working properly. The CMOS is cleared and the BIOS was reflashed, but it keeps failing to run when I'm at the BIOS or Windows. Ugh, that's really annoying.

banshee45
Senior Member

726

04-05-2019, 01:28 PM

#17

Do you have the motherboard drivers set up? It might start when you use the software.

banshee45

04-05-2019, 01:28 PM #17

Do you have the motherboard drivers set up? It might start when you use the software.

CAMOOO
Member

225

04-06-2019, 07:55 PM

#18

It doesn’t seem to function properly at all. I understand switching the fan header would help, but I only had two initially. Any other suggestions? Could be a hardware issue or something unexpected happened recently?

CAMOOO

04-06-2019, 07:55 PM #18

FrancisDragon
Member

213

04-08-2019, 07:06 PM

#19

Pretty strange. I dont have an answer for this one. All I know is the board is not working correctly if it doesnt give a cpu fan warning when its unplugged. Unless of course it's something stupid we havent thought of yet......

FrancisDragon

04-08-2019, 07:06 PM #19

Pages (2): Previous 1 2