CPU de-lid glue is a material used to secure or attach CPU de-lids.
CPU de-lid glue is a material used to secure or attach CPU de-lids.
I'm just trying to figure out the best way to reattach the CPU. I plan to start with a budget 3770 and need advice on the kind of adhesive to use. Some folks suggest superglue, silicon, or even just leaving it alone. I'm a bit unsure which method to choose. Thanks for your help, James!
Used UHU 46735, high temperature silicone sealant. Largely the same material Intel originally applies to the CPU.
I've relied on silicone throughout. Permatex Ultra Black is my go-to in the garage. It cleans up smoothly and can be taken off easily when needed. Just keep in mind, you should apply a very thin coating—spread it with a finger or similar. Less is better, as it requires minimal amount.
The silicone you mentioned is commonly found in auto repair shops and many hardware stores. If you're out of plastic razor blades, you might consider getting some (just a sample link, they carry limited stock). These silicone products work well for cleaning without harming surfaces.
Black or grey seems ideal, though blue options work too. It's all about sealing the edges. A tip: If you often swap CPU’s and face lid issues, apply a thin layer of super glue at the opposite corners of the lid. Just a drop or film on two (not all four) sides. Use acetone to remove it if needed. For best results, opt for gel super glue so you can control the thickness. Pair it with a small silicone bead to keep the lid securely in place.