Could there be compatibility problems with a 4 to 8 pin CPU power connector?
Could there be compatibility problems with a 4 to 8 pin CPU power connector?
I recently purchased an i3 12100, gigabyte H610M DDR4 with 8GB RAM. I’m not able to buy a case or power supply, so I’m using an old case and PSU. I discovered the CPU requires an 8-pin connector, but my current one only has a 4-pin connector. My main concern is whether I’ll face problems like unexpected shutdowns when using a 4-to-8 pin adapter.
Very low power but itll work, fsp is a high quality oem brand so nothing to be concerned about here, besides psus only job is to power the system without fail/reliably and if its doing that then your psu is ok
The 12100 CPU uses about 50-60 watts, which translates to roughly 5 amps from your 12V power source (likely the 12V1 listed on the label, capped at 8A). The motherboard will probably draw around 10 watts, mainly from the chipset, audio, and network components, staying within your 5V budget. RAM will likely run on 5V with only 2-3 watts per stick. You shouldn’t expect more than 100 watts overall, so it should fit the 250W power supply. It should function, especially if you install a dedicated video card that draws power directly from the slot—no extra connectors needed. For better efficiency, consider upgrading to a modern power supply.
Open to securing a case with a PSU in the future, appreciate your assistance!
Typically, the power supplies that come with include a case which tends to be of poor quality, outdated internal design, or other issues.
On a limited budget the best choice is swapping in a refurbished laptop case and pairing it with a solid, affordable power supply unit. Refurbished cases are usually fine, just a bit worn out, but easy to clean or replace. Power supplies from reputable brands often work well too.