F5F Stay Refreshed Hardware Desktop Core clocks at 7950x3d

Core clocks at 7950x3d

Core clocks at 7950x3d

M
MagiicCraft
Member
107
07-27-2023, 05:38 AM
#1
I observed that my 7950x3d reached 5.7ghz even when cache was turned off, but in Task Manager it usually shows 4.9-5.3ghz, sometimes dropping to 4.6 but staying within the listed range. In games, my 3D V-Cache cores stay around 4.8-4.9 while others are paused due to game mode settings. I have PBO enabled and no OC, so these numbers seem accurate.
M
MagiicCraft
07-27-2023, 05:38 AM #1

I observed that my 7950x3d reached 5.7ghz even when cache was turned off, but in Task Manager it usually shows 4.9-5.3ghz, sometimes dropping to 4.6 but staying within the listed range. In games, my 3D V-Cache cores stay around 4.8-4.9 while others are paused due to game mode settings. I have PBO enabled and no OC, so these numbers seem accurate.

P
pbking123
Junior Member
28
07-27-2023, 01:32 PM
#2
currently using the desktop, only Discord is active, a few cores hit around 5.5GHz, for clarity I’m not facing any problems—my CPU is performing well, just wanted to confirm everything is normal.
P
pbking123
07-27-2023, 01:32 PM #2

currently using the desktop, only Discord is active, a few cores hit around 5.5GHz, for clarity I’m not facing any problems—my CPU is performing well, just wanted to confirm everything is normal.

S
Samson44
Junior Member
11
07-27-2023, 08:52 PM
#3
Boost performance only when required, not on desktop for light tasks. Your voltage is low at 0.5V and clock speeds on x33 or x36 seem irregular. Are you using the standard BIOS settings? Did you install the AMD chipset drivers, especially the 3D support? Use HWInfo64 to run benchmarks or games and verify maximum clocks.
S
Samson44
07-27-2023, 08:52 PM #3

Boost performance only when required, not on desktop for light tasks. Your voltage is low at 0.5V and clock speeds on x33 or x36 seem irregular. Are you using the standard BIOS settings? Did you install the AMD chipset drivers, especially the 3D support? Use HWInfo64 to run benchmarks or games and verify maximum clocks.

A
amberleenie
Member
174
07-27-2023, 09:30 PM
#4
Windows requests CPU to execute XYZ boosts immediately, ensuring fast performance and keeping Windows satisfied.
A
amberleenie
07-27-2023, 09:30 PM #4

Windows requests CPU to execute XYZ boosts immediately, ensuring fast performance and keeping Windows satisfied.

T
Tishoko_
Junior Member
34
07-27-2023, 11:30 PM
#5
I’m working with stock settings, PBO is enabled, and I’ve installed the AMD chipset drivers. I’ve already completed benchmark tests, but I want to check my maximum clock speed using hwinfo instead.
T
Tishoko_
07-27-2023, 11:30 PM #5

I’m working with stock settings, PBO is enabled, and I’ve installed the AMD chipset drivers. I’ve already completed benchmark tests, but I want to check my maximum clock speed using hwinfo instead.

R
RaGed_Warrior
Junior Member
20
07-28-2023, 02:42 AM
#6
This took place in a Black Myth Wukong test where all three CPUs ran at 4.95-5GHz and the video stayed around 1.07-1.
R
RaGed_Warrior
07-28-2023, 02:42 AM #6

This took place in a Black Myth Wukong test where all three CPUs ran at 4.95-5GHz and the video stayed around 1.07-1.

W
WaterLily2003
Senior Member
648
07-30-2023, 03:05 PM
#7
Core temp is showing inaccurate readings, likely due to the desktop being idle with no active games or applications.
W
WaterLily2003
07-30-2023, 03:05 PM #7

Core temp is showing inaccurate readings, likely due to the desktop being idle with no active games or applications.

R
59
08-07-2023, 08:10 AM
#8
When playing cyberpunk my 3D cores hit 4.9GHz and video stayed near 1.069V, in desktop it usually stays around 1.100V, which suggests it’s using all cores compared to games that limit to 3D cores. That’s why the video drops, but it never goes as low as 0.5V like core temp reports.
R
RAGINGKODGRIMM
08-07-2023, 08:10 AM #8

When playing cyberpunk my 3D cores hit 4.9GHz and video stayed near 1.069V, in desktop it usually stays around 1.100V, which suggests it’s using all cores compared to games that limit to 3D cores. That’s why the video drops, but it never goes as low as 0.5V like core temp reports.

D
Dezzet
Junior Member
6
08-09-2023, 08:26 AM
#9
The chip functions properly, though the temperature readings seem off—possibly not compatible!
D
Dezzet
08-09-2023, 08:26 AM #9

The chip functions properly, though the temperature readings seem off—possibly not compatible!

I
iLwRo
Member
130
08-09-2023, 08:59 AM
#10
glad to hear everything is fine, thank you for your help!
I
iLwRo
08-09-2023, 08:59 AM #10

glad to hear everything is fine, thank you for your help!