Cooling idea for the 2 x 2011v3 / 48 core + 4 x Titan X setup
Cooling idea for the 2 x 2011v3 / 48 core + 4 x Titan X setup
Water cooling advice request: urgent
I need help with the following parts to install water cooling:
**************************
Components I have:
- Asus z10 pe d8 ws (water block, excluding RAM)
- 2 x E5 2680v3
- 4 x TITAN X (EVGA)
I require soft tubes and three redundant pumps for continuous operation without supervision.
I want the radiator placed outdoors within a maximum distance of 5 meters.
I found some solutions online from EKWB, but I’m confused about the tubing and fittings.
If possible, please share links where I can order the complete set so everything fits together.
Thank you ahead of time!
Best regards,
Cristian
I began planning a solution according to what was shared first. The good news is we’re aligned. However, EK ended up clearing my cart for some reason.
Fittings: [link]
Tubing: [link]
You’ll require 2 fittings per pump, CPU block, radiator, res, and two for the quad connection. With 3 pumps, 3 rads, and one res, you’re looking at around 20 fittings. For the 5 meters needed to place the radiator outside, add 10 meters of tube, plus another meter inside the case and one extra for safety. Depending on the radiators and reservoir, you might need additional...
The key factors to consider are threading and tube size. To maintain quality, it's wise to source all your fittings from the manufacturer of the water blocks you're using. EKWB primarily uses G1/4 thread fittings, which match the screw size for the water block. Given the number of components you're cooling, a tube diameter of 1/2" (13mm) or larger would be advisable. For maximum durability, compression fittings are likely the best choice. You should look for a compression fitting that links G1/4 threads to 1/2" (13mm) tubing.
I began planning the solution according to what you shared first. Great news, we’re aligned. However, EK ended up clearing my cart for some reason.
Fittings: [link]
Tubing: [link]
You’ll require 2 fittings per pump, CPU block, radiator, and res, plus 2 for the quad connection. With 3 pumps, 3 radiators, and one res, you’re looking at around 20 fittings. For the 5 meters needed to place the radiator outside, add 10 meters of tube, plus another meter inside the case and one extra for safety. Depending on the radiators and reservoir, you might need at least 2 but likely up to 3 liters of coolant.