Connection point featuring Ethernet cable.
Connection point featuring Ethernet cable.
I relocated into a new home with internet at about 60mbps, which is typical for the area. The router is upstairs, so my PC doesn’t have direct access. It’s slow—down to 5mbps and high ping—especially when moving in soon. I need an access point matching your current speed and with an Ethernet port for my computer. My budget is around 3000 rupees (about 40 dollars). We should get it up and running quickly since we’re moving in fast and I have classes, plus my dad works from home. Help is welcome!
Will you lay a cable to the access point on the upper floor, or will you rely on a makeshift solution using electrical wires for the signal?
You're likely to face some constraints with your budget, but a powerline kit could work well if you need both AP and wired Ethernet. These kits often include a secondary access point with extra Ethernet ports for direct connections. Check this link: https://www.tp-link.com/us/home-networki...a4530-kit/
I can't operate a cable, so I’d use the wireless repeater. It should give me an Ethernet and Wi-Fi connection at the speed your ISP offers. I’m also unsure if it’s available in India. Edit: I got it, but it’s not the same model. Would I need to extend my router’s Ethernet connection? I won’t be able to run the Ethernet jack far away, even with long cables.
It connects to your home’s electrical system, allowing the base unit to draw Ethernet from your router or modem and transmit the data through power lines. At the receiving end, it provides both Ethernet ports and a Wi-Fi hotspot. The signal strength at the output is largely affected by your home’s wiring setup. Older homes with outdated wiring can weaken the signal at the receiver. It’s difficult to predict exact performance, but using solid copper wiring and an updated fuse box with interrupters or breakers is recommended. This remains a broad suggestion.
It's a brand new home. I'm not sure about the wiring materials—it's a villa, so we just purchased it. We have a fuse box (probably MCCBs, no fuses) and most parts are brand new. I connect one device to a power outlet and another to an Ethernet cable from my router. The second device gets the signal at a similar speed using both Ethernet and Wi-Fi. Thanks for your assistance—I plan to use it in my house.
Do you understand the type of broadband your router supports? Powerline networking may significantly reduce DSL (phone line) performance, so it’s best to avoid it if available. Even devices advertised as DSL-safe aren’t completely free from interference. The problem is, you usually have limited choices—either run an Access Point between the router and your location needing stronger signals, or place a WiFi repeater halfway through. This can cut speed in half, but it might still be faster than your broadband, so it’s not always a major concern.
It should work well if your electrical setup is compatible with Powerline.