Connect the WPM controller to the MB at the designated port as specified in the manual.
Connect the WPM controller to the MB at the designated port as specified in the manual.
You're dealing with the Antec Dark League DF600 FLUX case that comes with a WPM controller. It seems the controller's layout matches what's shown on its website. For your MSI B550-A PRO, check the included connectors listed in the manual (E7C56v2.1.pdf). If not found there, look for the specific connector type in the case documentation.
Thanks for your patience! I’m trying to make sure everything is set up correctly. Do you know if all the power comes from just one cable, or do you need a separate one? If it’s the latter, where can I find more details? I want to avoid any issues with the device.
You're likely aiming to manage PWM signals only, though the PCB has two connections on the bottom. The right side features a 4-pin Molex connector labeled for 5V/ground/12V and POWER, supplying power to the device. It probably includes a cable adapter since Molex connectors are less common in today's PSUs.