F5F Stay Refreshed Power Users Networks Connect the access point to your network so devices can join wirelessly.

Connect the access point to your network so devices can join wirelessly.

Connect the access point to your network so devices can join wirelessly.

N
NotStrafes
Junior Member
Find
4
08-10-2023, 11:30 AM
#1
My computer lacks a wireless adapter, but I can connect to a router using a physical cable. Recently, I relocated to a new apartment where my study is far from the modem, which still supports wired connections. I’m considering either laying a cable or purchasing a wireless card, but I already own an extra router (Linksys EA4500) that I thought might help. Online advice suggests using the router as an access point connected to the modem via cable. Could I connect a wireless-capable router directly to the modem? Or will I need a wireless card instead?
Reply
Reply
N
NotStrafes
08-10-2023, 11:30 AM #1

My computer lacks a wireless adapter, but I can connect to a router using a physical cable. Recently, I relocated to a new apartment where my study is far from the modem, which still supports wired connections. I’m considering either laying a cable or purchasing a wireless card, but I already own an extra router (Linksys EA4500) that I thought might help. Online advice suggests using the router as an access point connected to the modem via cable. Could I connect a wireless-capable router directly to the modem? Or will I need a wireless card instead?

Reply
Reply
P
PixieYT_
Junior Member
Find
7
08-11-2023, 07:30 AM
#2
With DD-WRT support, you can set up the Linksys EA4500 and build a wireless bridge, allowing your computer to connect via it.
Reply
Reply
P
PixieYT_
08-11-2023, 07:30 AM #2

With DD-WRT support, you can set up the Linksys EA4500 and build a wireless bridge, allowing your computer to connect via it.

Reply
Reply
L
lWiltedl
Junior Member
Find
22
08-11-2023, 09:26 AM
#3
I will say it before someone else does, if the wire is an option, do it. There is no better solution. Failing that, powerline might be a better option than wireless. Wireless is generally the "if there is no other alternative" option as going through even one wall reduces the speed dramatically, across an apartment I'd expect it to reduce considerably. That's even before considering interference.
Reply
Reply
L
lWiltedl
08-11-2023, 09:26 AM #3

I will say it before someone else does, if the wire is an option, do it. There is no better solution. Failing that, powerline might be a better option than wireless. Wireless is generally the "if there is no other alternative" option as going through even one wall reduces the speed dramatically, across an apartment I'd expect it to reduce considerably. That's even before considering interference.

Reply
Reply
K
Krede88
Junior Member
Find
17
08-12-2023, 01:36 AM
#4
Does this offer a variation compared to the built-in bridge mode that comes pre-installed on the router? The documentation I’ve located indicates it still needs a wired connection between the router and modem.
Reply
Reply
K
Krede88
08-12-2023, 01:36 AM #4

Does this offer a variation compared to the built-in bridge mode that comes pre-installed on the router? The documentation I’ve located indicates it still needs a wired connection between the router and modem.

Reply
Reply
M
MrBertr4m
Member
Find
162
08-18-2023, 05:30 AM
#5
Not very familiar with powerline adapters because there are several units in the same building. There could be others sharing the same electrical path, which might affect my security.
Reply
Reply
M
MrBertr4m
08-18-2023, 05:30 AM #5

Not very familiar with powerline adapters because there are several units in the same building. There could be others sharing the same electrical path, which might affect my security.

Reply
Reply
J
JerenBear
Junior Member
Find
6
08-20-2023, 10:37 PM
#6
It differs from what you think. You'd link the Linksys router to your computer, which would then connect wirelessly to the existing router. However, you'll probably need to flash the Linksys using DDWRT first to enable this functionality.
Reply
Reply
J
JerenBear
08-20-2023, 10:37 PM #6

It differs from what you think. You'd link the Linksys router to your computer, which would then connect wirelessly to the existing router. However, you'll probably need to flash the Linksys using DDWRT first to enable this functionality.

Reply
Reply
A
Artek_
Member
Find
61
08-24-2023, 12:15 PM
#7
It appears a distinct bridge setting, unlike the previous Linksys guide, is available. DD-WRT supports wireless bridging functionality, but it seems your router might not be compatible.
Reply
Reply
A
Artek_
08-24-2023, 12:15 PM #7

It appears a distinct bridge setting, unlike the previous Linksys guide, is available. DD-WRT supports wireless bridging functionality, but it seems your router might not be compatible.

Reply
Reply
P
Pinky_Boss00
Junior Member
Find
20
09-12-2023, 01:24 AM
#8
I noticed the same thing and was very let down, but I managed to locate an old Linksys WRT54G v2.2 and am now focusing on setting up DD WRT on it! Thanks a lot for the advice!
Reply
Reply
P
Pinky_Boss00
09-12-2023, 01:24 AM #8

I noticed the same thing and was very let down, but I managed to locate an old Linksys WRT54G v2.2 and am now focusing on setting up DD WRT on it! Thanks a lot for the advice!

Reply
Reply