Connect the 6 Corsair ML120 Pro RGB to your Asus ROG Strix Z490 using a compatible cable and proper setup.
Connect the 6 Corsair ML120 Pro RGB to your Asus ROG Strix Z490 using a compatible cable and proper setup.
the motherboard only has two fan headers, but you have six Corsair 120 pro rgb fans. each fan needs its own power and signal wires. you can use a hub to connect multiple rgb fans together, then link the hub to your motherboard. this way all six fans will be powered and controlled properly.
The hub supports only RGB control. You'll need splitters to link them together. Based on what I remember, the MF120R 3-pack should include a 3-way PWM splitter, allowing you to connect three fans to one header or distribute them across multiple headers.
This board features 8 fan connectors. You might also consider using splitters.
The unit includes one CPU OPT fan port, two chassis fans, an AIO pump connector, a W_PUMP+ connector, and two addressable RGB headers. Only the second chassis fan header is present.
You can utilize the 1-AIO_PUMP, 2-PUMP+ connector, 3-CPU Fan opt, and Addressable RGB header for case fans. These components are designed to work together, but they don’t guarantee continuous full-speed operation. You’ll have control over their speeds, and the M2 fan header can also be adapted for case use.