F5F Stay Refreshed Power Users Overclocking Confused during the Overclocking Problem (first occurrence)

Confused during the Overclocking Problem (first occurrence)

Confused during the Overclocking Problem (first occurrence)

T
Thumps209LV
Member
Find
226
11-06-2024, 08:19 AM
#1
Building: i5 6600k with cryorig a80 water cooler
Chipset: ASUS Z170AR
GPU: ASUS GTX1060 3GB
RAM: 16GB Team T Force 3000Mhz
Storage: Intel M.2 600p 512GB
Cooler: Corsair CX750M
Operating System: Windows 10

Started experimenting with overclocking, gradually increasing CPU core voltage by 0.025 up to 1.3, then fixed it at 1.3 and raised BCLK to 103. After saving and exiting, the system restarted but failed again—turned off completely, then back on without a monitor signal. Needed to keep power on to get a response. Restarting after a crash always resulted in an overclocking failure. Reinstalled default settings, but the issue persisted. CMOS was cleared and the same problem occurred. CPU_OV jumper wasn’t installed initially; after purchasing it and reinstalling, everything stayed unchanged. I can reset BIOS settings to try accessing Windows, though I’m still confused. Prime95 and IBT tests showed normal results, but the processor failed at 55°C. Overall very puzzled. Please help me out with this metal box!
Reply
Reply
T
Thumps209LV
11-06-2024, 08:19 AM #1

Building: i5 6600k with cryorig a80 water cooler
Chipset: ASUS Z170AR
GPU: ASUS GTX1060 3GB
RAM: 16GB Team T Force 3000Mhz
Storage: Intel M.2 600p 512GB
Cooler: Corsair CX750M
Operating System: Windows 10

Started experimenting with overclocking, gradually increasing CPU core voltage by 0.025 up to 1.3, then fixed it at 1.3 and raised BCLK to 103. After saving and exiting, the system restarted but failed again—turned off completely, then back on without a monitor signal. Needed to keep power on to get a response. Restarting after a crash always resulted in an overclocking failure. Reinstalled default settings, but the issue persisted. CMOS was cleared and the same problem occurred. CPU_OV jumper wasn’t installed initially; after purchasing it and reinstalling, everything stayed unchanged. I can reset BIOS settings to try accessing Windows, though I’m still confused. Prime95 and IBT tests showed normal results, but the processor failed at 55°C. Overall very puzzled. Please help me out with this metal box!

Reply
Reply
K
kloseseb11
Member
Find
61
11-06-2024, 08:19 AM
#2
Ah well, it seems you're not familiar with the initial stage of fixing overclocking issues for Robomom. What a weak robot you are. I'll guide you through the process of raising that i5 from 3.5ghz to 35ghz.
Reply
Reply
K
kloseseb11
11-06-2024, 08:19 AM #2

Ah well, it seems you're not familiar with the initial stage of fixing overclocking issues for Robomom. What a weak robot you are. I'll guide you through the process of raising that i5 from 3.5ghz to 35ghz.

Reply
Reply