Configure a second router using powerline technology.
Configure a second router using powerline technology.
Hello, I understand your setup and the challenges you're facing. You're trying to extend your network using powerline Ethernet but are unsure about the best approach. You mentioned considering a switch or replacing your current router. It might be worth exploring options that support powerline connectivity directly, such as the Ethernet-over-PLC devices available online. Make sure to check compatibility with your existing hardware and consider consulting a technician if needed. Let me know if you'd like more details!
Sure, I understand. You're asking if your question was about using a Wi-Fi extender without running cables through your living space, specifically because you don't want cables to be buried underground.
Choose one access point instead of a second router. Most home routers already handle routing, security, and switching functions. Combining more devices can cause parts of your network to become isolated. For an affordable solution, consider a power line adapter that includes built-in WiFi. Popular options include Devolo and TP-Link. However, older chipsets in non-branded devices often limit performance. Better results come from using reliable chips from established manufacturers. For example, see this link: https://www.amazon.com/dp/B07X6HXXFQ/ref...k_detail_4. Place the small adapter near your router, connect a cable to both ends, and follow the instructions in the included manual. Typically, you’ll need to: 1) obtain the IP address (check your router’s settings or use a discovery tool), 2) access the adapter’s web interface, 3) configure Wi-Fi settings such as SSID and password, ensuring no NAT or DHCP is active. Once set up, your streaming devices should connect more reliably. The power line page often provides speed estimates based on your home wiring and external interference.
Based on the type of extension used, performance could drop significantly. For instance, WDS reduces bandwidth by half and increases latency with each hop. Certain devices function as both a wireless client and a bridge/repeater, but manufacturers often omit this feature to avoid confusing customers. If it combines client and access point roles, it may still be viable—just ensure sufficient bandwidth remains midway through the process.
Yes, they are features that can be enabled or disabled. NAT controls how devices share a private IP address over the internet, while DHCP assigns dynamic IP addresses automatically.
Yeah, that's what I meant, it's wireless, the thing is I can't really put it anywhere in between these two rooms, and just one wall blocks it off, and on the extender wifi I have half download/upload. Thank you very much for answering, I appreciate any help
Yes, they are features that can be enabled or disabled. NAT controls how your device shares its IP address with the internet, while DHCP assigns dynamic IP addresses automatically.
They say the bigger ones might work better, though extra antennas could help too. DHCP handles giving out local IP addresses, which is typically the routers responsibility. NAT lets devices connect to the internet, usually built into the modem. WAN (internet) connects through NAT and a router, then reaches the LAN.