Completely new construction.

Eragon1512
Member

07-05-2018, 03:31 AM

Good day, I just got myself a new build: AMD Ryzen 7 2700X Wraith Boxed Asus PRIME X470-PRO Corsair Vengeance LPX CMK32GX4M2B3200C16 Corsair RM750x (2018) Zwart I tried to enable XMP to get it to 3200Mhz, but the motherboard restarted 3 times and entered safe mode, stating that the last bios edit was not gonna work. I turned off the PC and reseated the RAM sticks, without success. I tried to manual turn off XMP and set clock to 3000, did not work, yet 2833 did work. I started memtest and got the following errors: Is this memory related or could it be the CPU?

Eragon1512

07-05-2018, 03:31 AM #1

NorthwestSun
Member

202

07-05-2018, 08:58 AM

All parts are brand new by the way!

NorthwestSun

07-05-2018, 08:58 AM #2

All parts are brand new by the way!

xBlqzex
Member

07-06-2018, 07:56 AM

Yes, RAM is available in slots 2 and 4.

xBlqzex

07-06-2018, 07:56 AM #3

Yes, RAM is available in slots 2 and 4.

mr_creepzilla
Junior Member

07-06-2018, 11:49 AM

It could be either or both, honestly.

mr_creepzilla

07-06-2018, 11:49 AM #4

It could be either or both, honestly.

SlaRac0nte_
Member

217

07-08-2018, 07:50 AM

Uncertain, but I believe they're in slots 2 and 4. I can review this tonight.

SlaRac0nte_

07-08-2018, 07:50 AM #5

Uncertain, but I believe they're in slots 2 and 4. I can review this tonight.

slayer__is
Senior Member

521

07-27-2018, 09:13 PM

Need to position them in slots 2 and 4. Enable XMP profile and manually adjust DRAM voltage to 1.35 (occasionally the automatic setting fails). If issue persists, try switching frequency to 3000 or 2933. 2000 series Ryzen may not function properly with RAM above 3000.