Comparing memory speed and data transfer rates in laptops helps understand performance differences.
Comparing memory speed and data transfer rates in laptops helps understand performance differences.
Bibble_Ele
02-22-2023, 10:28 AM #1You're considering upgrading your laptop's memory to 2x8GB kits. One kit is labeled CL15 at 2666MHz, while another is CL22 at 3200MHz. Based on benchmarks, each decrease in clock speed by one CL results in roughly a 1% drop in performance, and the 2666-3200 range offers a solid boost. Since your laptop is already running at 3200MHz, it should handle the upgrade without issues. However, the CL15 kit might not come pre-configured at that speed—you might need to adjust the timings yourself if it doesn't appear as expected. If you're concerned about compatibility or performance, reaching out to the manufacturer or checking reviews could help. Let me know if you need more details! Thanks a million!
Whatever package you receive, unless it matches the one already inside your laptop, it will operate using the lowest fixed JEDEC standard. Avoid upgrading laptop RAM just to achieve reduced latency or increased bandwidth. Most laptop BIOS systems don’t permit users to apply XMP profiles, timings, or frequencies beyond the hardcoded values they originally set.
RelampagoMC
03-14-2023, 07:58 PM #3The quicker memory performance is likely due to the 3200MHz speed, and yes, CL15 will probably be a memory profile.
You mentioned having 8 GB installed... is it two 4 GB sticks or one 8 GB stick? If it’s a single unit, it’s removable or soldered to the board. If soldered, choose another stick with matching frequency and better timings. For more details, use CPU-Z or Aida64.
If you have a single stick, you don’t need two 8 GB modules; just add one to your existing setup. It’s helpful to get RAM from the same brand (e.g., Micron, Nanya, Samsung, Hynix). Aida64 can show the maker of your chips, but you can also identify them by inspecting the actual chips.
nickiseenminer
03-14-2023, 08:07 PM #4The settings are set in a profile, YET the laptop also includes some fixed profiles that can take precedence over your saved ones. Opt for the higher frequency option; those with higher speeds typically have several lower-frequency profiles (like 3000, 2833, or 2666 MHz). As frequency increases, latency needs more adjustment (3200 CL 22 = 3000 CL 20 = 2800 CL 18 = 2666 CL16). The laptop’s BIOS usually sets it to around 2666 MHz CL18-20, or matches your existing sticks. BIOS might let you fine-tune timings.
You mentioned having 8 GB installed... is it two 4 GB sticks or one 8 GB stick? If it’s a single unit, it’s removable or soldered to the board. If soldered, choose another stick with matching frequency and better timings. For more details, use CPU-Z or Aida64.
If you have a single stick, you don’t need two 8 GB modules; just add one to your existing setup. It’s helpful to get RAM from the same brand (e.g., Micron, Nanya, Samsung, Hynix). Aida64 can show the maker of your chips, but you can also identify them by inspecting the actual chips.