Compare Corsair Vengeance and Corsair Dominator to see which suits your needs best.
Compare Corsair Vengeance and Corsair Dominator to see which suits your needs best.
Hello, your 7800X3D build is shaping up nicely. You're considering two RAM options: the Corsair Dominator RGB 32GB and the Corsair Vengeance RGB 32GB. Both are 2x16GB modules at 6000MHz with different voltages—1.35V and 1.1V respectively. The higher voltage model might be a bit more demanding, but it’s still within typical safe ranges for most systems. You’re right to check the specs; using 1.35V is generally fine unless you have specific power constraints. It should work without issues, so you can go ahead with either choice.
Any voltage on an xmp profile is a safe voltage, doesnt matter if its 1.35v 1.5v or 1.6v its still safe because the manufacturer literally warranties it Youll find cheaper gskill kits with the same hynix a die as that corsair vengeance (5600c30/28, 6000c32/30) so theres no point paying a premium for the same ics. Also that corsair dominator is hot garbage, overpriced but worse hynix m die ics (basically you are stuck to 7200 instead of the 8000+ hynix a die can run)
I don’t find XMP useful since I’m using an AMD 7800X3D and my location in Australia restricts me from accessing the same RAM choices as elsewhere. That’s why I went with two RAM models that are currently discounted and more budget-friendly than G.Skill, which is exactly what I needed. I don’t mind if it wasn’t my main concern.
This saying emphasizes that learning involves mistakes and that it's okay not to have all the answers. People often hesitate to ask questions even when they're unsure, but doing so can actually help others.