Clearing CMOS problem
Clearing CMOS problem
I previously managed this with other motherboards using a screwdriver technique to connect the pins—unplugging the PC, checking the CMOS pins in the manual, briefly bridging them with a screwdriver. However, it doesn’t work on a B550 AORUS Elite. The only solution is removing the battery, which is tricky since it’s located behind the GPU. It lacks a visible CMOS button. What might I have overlooked?
You're wondering if skipping the GPU each time is a good idea when trying to overclock RAM. It's not a standard approach, but you're right—using a screwdriver method isn't reliable. The manual suggests it might not be effective.
Thanks for your patience. I used two different screwdrivers and left it there for a while, but it still won’t work. Removing the battery helps. Do you think using an old motherboard jumper would fix it, since a screwdriver should handle that too? I’m really struggling here—it’s like dealing with basic issues in a tough situation.
The safest approach is to cut off the power source via the on/off switch in the rear or by removing the power cord. Allow a minimum of 5-10 seconds so the 5V standby circuit discharges completely. Alternatively, you can short the pins or unplug the battery; however, the CMOS might still receive power through the standby voltage from your supply.