Choose the same SSID for your repeater. Select a channel that minimizes interference for optimal performance.
Choose the same SSID for your repeater. Select a channel that minimizes interference for optimal performance.
I've arranged your setup with one router from the internet provider and an Ethernet repeater on the second floor. The aim is to connect both floors smoothly using the same network name and password. Initially, I set the channel to "Auto," but neighbors experienced connectivity problems. Now we're testing channel 5 for the repeater and channel 6 for the router (the default setting). I've attached the SSIDs for each device. Since I'm not very familiar with networking, I don't know the optimal channel or frequency settings. Any advice would be greatly appreciated!
Enable auto with confidence. If it works well, it should be fine. Otherwise, run a Wi-Fi analyzer on a connected device and pick the least congested channel. Be aware that a repeater can halve your speed and add delay. They often perform poorly, so a mesh network tends to be more reliable.
Mesh options are available, though some may be pricier. If you're okay with Ethernet over a repeater, it works well and reduces latency.