F5F Stay Refreshed Hardware Desktop Checking RAM and motherboard fit is essential for proper setup.

Checking RAM and motherboard fit is essential for proper setup.

Checking RAM and motherboard fit is essential for proper setup.

B
baconandfries
Member
215
09-22-2020, 03:09 AM
#1
hello friends, welcome! i recently purchased some pc components and everything is working properly. i noticed that the system is using corsair vengeance rgb pro 2x16 cl 16 ram with the serial code cmw32gx4m2e3200c16. the box claims it's intel xmp certified, which is good. i checked the b550 aorus elite v2 ram manual, but i couldn't find any details about it. i also attached photos of the motherboard and the ram for reference. could you confirm if there are any problems? additionally, i set up an xmp profile in bios at 3200mhz, and i wasn’t sure this setting was ever made before. thanks!
B
baconandfries
09-22-2020, 03:09 AM #1

hello friends, welcome! i recently purchased some pc components and everything is working properly. i noticed that the system is using corsair vengeance rgb pro 2x16 cl 16 ram with the serial code cmw32gx4m2e3200c16. the box claims it's intel xmp certified, which is good. i checked the b550 aorus elite v2 ram manual, but i couldn't find any details about it. i also attached photos of the motherboard and the ram for reference. could you confirm if there are any problems? additionally, i set up an xmp profile in bios at 3200mhz, and i wasn’t sure this setting was ever made before. thanks!

M
MairOmax
Junior Member
9
09-27-2020, 09:19 AM
#2
No problems at all
M
MairOmax
09-27-2020, 09:19 AM #2

No problems at all

N
NextSonic
Member
85
09-27-2020, 04:08 PM
#3
It seems the memory isn't behaving as expected. Sudden failures in programs might stem from excessive RAM settings (XMP effectively overclocks it). Unless you've seen any issues, it's likely your setup is stable.
N
NextSonic
09-27-2020, 04:08 PM #3

It seems the memory isn't behaving as expected. Sudden failures in programs might stem from excessive RAM settings (XMP effectively overclocks it). Unless you've seen any issues, it's likely your setup is stable.

A
Aatv
Junior Member
12
09-28-2020, 07:17 PM
#4
I've configured the XMP to 3200 and I don't see any need to increase it further. I believe it should remain stable at this frequency, correct? Appreciate your response.
A
Aatv
09-28-2020, 07:17 PM #4

I've configured the XMP to 3200 and I don't see any need to increase it further. I believe it should remain stable at this frequency, correct? Appreciate your response.

S
Sunahh
Posting Freak
863
10-03-2020, 03:10 AM
#5
There are options to check RAM stability (I’ve tried memtest myself, though I think only the USB version is free). If you’re satisfied with speed and haven’t seen any issues, you probably don’t need to worry about it.
S
Sunahh
10-03-2020, 03:10 AM #5

There are options to check RAM stability (I’ve tried memtest myself, though I think only the USB version is free). If you’re satisfied with speed and haven’t seen any issues, you probably don’t need to worry about it.

N
naTe_coRe_1084
Senior Member
254
10-03-2020, 10:25 AM
#6
Thank you for your response.
N
naTe_coRe_1084
10-03-2020, 10:25 AM #6

Thank you for your response.