F5F Stay Refreshed Hardware Desktop Checking if upgrading your RAM is beneficial depends on your system needs and usage patterns.

Checking if upgrading your RAM is beneficial depends on your system needs and usage patterns.

Checking if upgrading your RAM is beneficial depends on your system needs and usage patterns.

S
simon3021
Junior Member
8
11-21-2022, 11:53 AM
#1
I own a 2x8GB G Skill Trident Z RGB RAM (F4-3200C16D-16GTZR) built with Hynix AFR die and rated timings of 16-18-18-38 at 3200 MT/s. I'm assembling this system for my brother, making stability the main goal—no BSODs during games is essential. With no prior overclocking experience, should I try boosting the memory or simply enable XMP profiles? If yes, what gains can I expect and where to find reliable guides?

Recommended parts:
- PCPartPicker for detailed specs
- XMP profiles for stability
- Overclocking resources from trusted forums or manufacturers
S
simon3021
11-21-2022, 11:53 AM #1

I own a 2x8GB G Skill Trident Z RGB RAM (F4-3200C16D-16GTZR) built with Hynix AFR die and rated timings of 16-18-18-38 at 3200 MT/s. I'm assembling this system for my brother, making stability the main goal—no BSODs during games is essential. With no prior overclocking experience, should I try boosting the memory or simply enable XMP profiles? If yes, what gains can I expect and where to find reliable guides?

Recommended parts:
- PCPartPicker for detailed specs
- XMP profiles for stability
- Overclocking resources from trusted forums or manufacturers

T
Tyazoyd
Member
71
11-21-2022, 02:11 PM
#2
Activate XMP now. For optimal reliability, use 2133MHz, though this will reduce speed significantly.
T
Tyazoyd
11-21-2022, 02:11 PM #2

Activate XMP now. For optimal reliability, use 2133MHz, though this will reduce speed significantly.

I
ItsTheSoul
Senior Member
410
11-25-2022, 01:50 AM
#3
The specifications listed on the packaging confirm consistent performance under normal conditions. Factory testing ensures reliability for everyday operation.
I
ItsTheSoul
11-25-2022, 01:50 AM #3

The specifications listed on the packaging confirm consistent performance under normal conditions. Factory testing ensures reliability for everyday operation.

C
ChadlyG
Member
171
11-25-2022, 04:40 AM
#4
Stable in 99.9999999% of cases, yes. There is always the tiny,tiny chance it won't work.
C
ChadlyG
11-25-2022, 04:40 AM #4

Stable in 99.9999999% of cases, yes. There is always the tiny,tiny chance it won't work.

T
Tricksta123
Member
174
11-25-2022, 11:54 AM
#5
enable xmp and be done with it. as for manual over clocking, this is an AFR kit, not the best for that to say the least.
T
Tricksta123
11-25-2022, 11:54 AM #5

enable xmp and be done with it. as for manual over clocking, this is an AFR kit, not the best for that to say the least.

T
Thunderfran
Member
96
11-29-2022, 01:42 PM
#6
[Disclaimer, the following is from what ive understood thus far, so pls correct me should i have misunderstood ] 3200mhz with 3000 series cpu and capable motherboards is now the upper limit of jedec standards (meaning its no longer considered a OC). So that 0.0000001% would be rma-able if it doesnt work (as long as on qvl) and would basicaly be the same as a doa cpu or doa 2133 stick. (That said, your argument stands true, with these insane frequencies these days and the combination of components, theres always chance of a "unhappy marriage" between some components, sometimes preventing them from reaching specced speeds, and unfortunaly, it feels like that chance is bigger then afformentioned percentages unfortunatly). Yes, on current (and your listed) hardware. On lets say a b450 board or 2600, no, since there its considered a overclock, so "just luck" is a keycomponent there. As for the original question: no, not worth it, only thing it would show is in benchmarks and single digit fps gains - to me that would not be worth risking maximum stability or lifespan (but only you can decide the answer for yourself ) Go xmp and let the stuff do its thang...
T
Thunderfran
11-29-2022, 01:42 PM #6

[Disclaimer, the following is from what ive understood thus far, so pls correct me should i have misunderstood ] 3200mhz with 3000 series cpu and capable motherboards is now the upper limit of jedec standards (meaning its no longer considered a OC). So that 0.0000001% would be rma-able if it doesnt work (as long as on qvl) and would basicaly be the same as a doa cpu or doa 2133 stick. (That said, your argument stands true, with these insane frequencies these days and the combination of components, theres always chance of a "unhappy marriage" between some components, sometimes preventing them from reaching specced speeds, and unfortunaly, it feels like that chance is bigger then afformentioned percentages unfortunatly). Yes, on current (and your listed) hardware. On lets say a b450 board or 2600, no, since there its considered a overclock, so "just luck" is a keycomponent there. As for the original question: no, not worth it, only thing it would show is in benchmarks and single digit fps gains - to me that would not be worth risking maximum stability or lifespan (but only you can decide the answer for yourself ) Go xmp and let the stuff do its thang...

F
fluffyyy2
Member
55
12-10-2022, 11:01 PM
#7
Thanks for the details, I'll keep using XMP. Marking it as solved.
F
fluffyyy2
12-10-2022, 11:01 PM #7

Thanks for the details, I'll keep using XMP. Marking it as solved.

F
Fred_Flyer
Junior Member
12
12-15-2022, 03:56 PM
#8
No, I haven't purchased the parts yet.
F
Fred_Flyer
12-15-2022, 03:56 PM #8

No, I haven't purchased the parts yet.

M
MaartenMorre
Member
63
12-15-2022, 11:13 PM
#9
Yeah
M
MaartenMorre
12-15-2022, 11:13 PM #9

Yeah

T
TooMarlin
Member
60
12-16-2022, 05:40 AM
#10
Sure, turn on XMP and try increasing the voltage to 1.4 or 1.45V to observe the results.
T
TooMarlin
12-16-2022, 05:40 AM #10

Sure, turn on XMP and try increasing the voltage to 1.4 or 1.45V to observe the results.